Chia sẻROM/Firmware cho điện thoại QIANGZHE P6 (IPhone 6) SC6825

Đây là ROM cho điện thoại Trung Quốc QIANGZHE P6 (IPhone 6), chipset SC6825. Anh em nào cần thì download:
<Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

 
Hướng dẫn nạp ROM: <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

 

 

thanks for this firmware, but i got display problem after flashing this ROM, please help me

<Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

 

this is the phone model

 

Hi,
I am a little confused with your captured images:
- Phone label: 2 IMEI numbers but there's 1 simcard slot on the real board.
- Your model name is "6S" but this shared ROM is "QIANGZHE P6 (IPhone 6)"

Please support me to cross-check and confirm some information:
1. Your phone is one SIMCARD model ?
2. What kind of chipset is being used in your phone (SC6820/SC6825/SC8810/...) ? (You can check in your phone or use software to read phone information).
3. If you have phone information/can read phone information, please support to post here for quick & accurate search.

Brs.

 

thanks for the reply :
1 : yes its dual sim phone
2. chipset is 6825c
3. i dont have any information other than the chípset
U7C2_02(6825c)_140626_1010 this is printed in the label.

 

So sorry, I don't have the correct ROM for this model.
I have ROM for Tengda 6S SC8825, not SC6825C. You can download for reference:
<Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

 

 

i already tried that rom , but same display problem
initially phone was working well, tried to repair IMEI in GPGDRAGON tool, after that phone became blank,
tried many roms but getting display problem

 

Can you use GPGDRAGON tool to read phone information & post here ?

 

>>> USB Pinfind No need Hold Mobile Power key...
>>> Scanning Mobile USB Port...
>>> Detecting COM PortCOM74
Driver Name->>>SCI USB2Serial
>>> Connecting Mobile...
Mobile Connection Success...
Mobile Firmware Version:SPRD3
>>> Downloading First Boot...
>>> Mobile Info
Project ID :Spreadtrum Boot Block version 1.1
>>> Downloading Second Boot...
Baud Rate is Switched To:921600
CPU Name:8825/6825
All Done...

 

<Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

 

 

any updates?????

 

Currently, I have version 2 ROM of QIANGZHE P6 (IPhone 6) SC6825. You can download for reference: <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

 

Brs.

 

same dísplay problem (

 

i have same model now , can anybody tell me how to backup flash ?????

 

Hi,
Please refer to this article/thread:
<Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

 
Video clip:

I don't know whether this method works with chipset SC8825 or not, please try...

 

this is the ìnformation i got in volcono tôol.


Connect the device successfully, the information of the device is as follows:

Model: I6
Android version: 4.0.3
Baseband: DM_BASE_13B_W13.34|sc6825_modem|08-24-2013 21:44:14
IMEI1: 493006102397420


The above information is for reference only.

Device found.

Have been Su Rooted.


--------------------------------
Process start-
Start At:20-21:45:23
Valid Adb
restart adb...
restart adb OK
Is Rooted
Chip Type : Spreadtrum
Chip Detail : sc8825
Chip :SPRD
Details :SC8825
Lack of Infomation detected

This Phone may not supprted in this program

Get Partition Info Succ
System 'File System':ext4
Storage Type:EMMC
No Avail Storage Path Found
>>Process end -Failed

 

firmware i need is : U7C.XH.M2.NC.F2.V3.08

 

So sorry, I don't have this ROM version...

 

problem solved big thanks to noname bro
used this version : U7C.XH.M2.NC.F2.V3.09 , unchecked backup NV in settings. flashed mobile without anyproblem, phone become alive now

 

help rom u7c5 sc6825c