↑ ↓

X1-01 flash ok by ATF

Thảo luận trong 'ROM/Firmware'

  1. TuệNguyễn
    Offline

    TuệNguyễn MODERATOR

    Tham gia ngày:
    6/10/11
    Bài viết:
    477
    Đã được thích:
    307
    Giới tính:
    Nam
    Nơi ở:
    159/7/2 Đường TTH07 phường Tân Thới Hiệp Q12 TPHCM
    X1-01 flash ok by ATF
    [​IMG]
    Sending PBL 19456 bytes...
    PBL Successfully Sent...

    Sending SBL 65024 bytes...
    SBL Successfully Sent...

    Flash Chip Manufacturer: Samsung Electronics Corp.
    Flash Chip Type: K8S6415ETC 64 Mbit (4Mb x 16) NOR
    Extended Information: Multiple Bank / Burst / 1.8v

    Processing Image File: C:\Program Files\Nokia\Phoenix\Products\RM-713\rm713_005.290

    FIRMWARE Image Found...
    Number of Sections: 03
    FIRMWARE Certificate Block Sent Successfully...
    Processing Section 01 of 03
    FIRMWARE Erase Block: 0x00000000~0x0001FFFE
    Start Erasing...
    Erasing Please Wait...
    Block Erase Done...
    Preparing Data Blocks...
    Data Size: 24576 bytes
    Data Checksum: 55FD
    Uploading Data Blocks to phone...
    FIRMWARE Data Blocks uploaded to phone...
    Processing Section 02 of 03
    FIRMWARE Erase Block: 0x00800000~0x00BFFFFE
    Start Erasing...
    Erasing Please Wait...
    Block Erase Done...
    Preparing Data Blocks...
    Data Size: 4128768 bytes
    Data Checksum: 0D04
    Uploading Data Blocks to phone...
    FIRMWARE Data Blocks uploaded to phone...
    Processing Section 03 of 03
    FIRMWARE Erase Block: 0x00C5D000~0x00E5FFFE
    Start Erasing...
    Erasing Please Wait...
    Block Erase Done...
    Preparing Data Blocks...
    Data Size: 1697536 bytes
    Data Checksum: CC08
    Uploading Data Blocks to phone...
    FIRMWARE Data Blocks uploaded to phone...
    Start Data Verification... (Please wait)
    Data Verification Successful...


    Processing Image File: C:\Program Files\Nokia\Phoenix\Products\RM-713\rm713_005.29mr

    PPM Image Found...
    Number of Sections: 01
    PPM Certificate Block Sent Successfully...
    Processing Section 01 of 01
    PPM Erase Block: 0x00100000~0x0061113E
    Start Erasing...
    Erasing Please Wait...
    Block Erase Done...
    Preparing Data Blocks...
    Data Size: 5312832 bytes
    Data Checksum: 22BD
    Uploading Data Blocks to phone...
    PPM Data Blocks uploaded to phone...
    Start Data Verification... (Please wait)
    Data Verification Successful...


    Processing Image File: C:\Program Files\Nokia\Phoenix\Products\RM-713\rm7130_nai05.29mr

    CONTENT Image Found...
    Number of Sections: 01
    CONTENT Certificate Block Sent Successfully...
    Processing Section 01 of 01
    CONTENT Erase Block: 0x00E60000~0x00F0DF7E
    Start Erasing...
    Erasing Please Wait...
    Block Erase Done...
    Preparing Data Blocks...
    Data Size: 712576 bytes
    Data Checksum: A1C9
    Uploading Data Blocks to phone...
    CONTENT Data Blocks uploaded to phone...
    Start Data Verification... (Please wait)
    Data Verification Successful...


    Exit Flash Mode Done...
    Time Elapse : 00:04:46

    ******************************************************
    You must Factory Reset the phone to enable the
    ringtones and other customized settings to work
    ******************************************************


    Waiting For Phone to go Online...

    5, 4, 3, 2, 1...
    MCU: V 05.29 10-06-11 RM-713 (c) Nokia
    IMEI: 357893043761649
    Product Serial Number: 270C587AH
    Product Code : 059D900
    Module Code : 0204727
    Basic Production Code: 059K2G8
    MCU SW Version : V 05.29 10-06-11 RM-713 (c) Nokia MR
    ADSP Version : p V 05.29\n10-06-11\nRM-713\n(c) NMP\nmr
    PPM Version : V 05.29 10-06-11 RM-713 (c) Nokia
    HW Version : 1000
    UEM Version : 1328
    UPP Version : 8850
    LCD Version : TPO:BARACOAv82 HX5081
    ********** SIMLOCK INFO **********
    CONFIG_DATA : 0010100000000000
    PROFILE_BITS : 0000000000030002
    Asic : 11
    Provider : Default Test Operator

    Block [1] 1:Open 2:Open 3:Open 4:Open 5:Open
    Block [2] 1:Open 2:Open 3:Open 4:Open 5:Open
    Block [3] 1:Open 2:Open 3:Open 4:Open 5:Open
    Block [4] 1:Open 2:Open 3:Open 4:Open 5:Open
    Block [5] 1:Open 2:Open 3:Open 4:Open 5:Open
    Block [6] 1:Open 2:Open 3:Open 4:Open 5:Open
    Block [7] 1:Open 2:Open 3:Open 4:Open 5:Open
    ST_LCD_TEST : PASSED
     

Chia sẻ trang này

Google+