Selected connection metod: Flash Connection Exe version: NCKBox AndroidMTK 1.8.7.7 Selected phone: MT6572_EMMC Action : IMEI REPAIR. IMEI[1] for write : 123456789123456 IMEI[2] for write : 123456789012345 Reinsert phone battery. Battery must be charged. Phone must be off with battery inside. Please insert USB cable now... Detected : MediaTek PreLoader USB VCOM (Android) (COM108) Boot mode: Preloader Phone detected...Please wait Sending DA agent, please wait... BaseBand CPU :MT6575_S01 BaseBand CPU Secure Version : FF BaseBand CPU Bootloader Version : 01 ---------------------------------------------------- INT RAM: 128 KB SDRAM EXT RAM: 512 MB DRAM ---------------------------------------------------- EMMC: (28Gb+4096Mb) HYNIX 0x2058494e5948 EMMC FW VERSION: 12:00:00:00:00:00:00:00 EMMC CID: 90014A2058494E : 000000000000000000 EMMC UA SIZE: 0xe7000000 BOOT STYLE: EMMC BOOT FULL LENGTH: 0xe7600000 [3.615 GB] Preloader SEC version: 2 Status: USB_HIGH_SPEED Detecting high speed port, wait...... If driver not installed, install high speed port driver. If not need high speed port, disable it. After repeat opperation. Detecting high speed port, wait...... Detected : MediaTek DA USB VCOM (Android) (COM107) Dumping data, wait. Reading imei IMEI[1]: 863592019168196 IMEI[2]: 863592019168204 Backup saved: C:\Users\nhatgia007\Documents\Android_MTK\nvram_ba ckup\FLASH_MODE_NVRAM_MT6575_S01_863592019168196_8 63592019168204_02_21_2017_16_42_17.zip Writing imei IMEI[1] TO UPDATE: 123456789123456 IMEI[2] TO UPDATE: 123456789012345 To activate imei need to perform wipe or Clear EMMC from factory mode. Wait untill phone will start charging. All done. [/IMG] <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!> <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>
