Samsung Wave 2 S8530: How to Flash and Upgrade to Bada 2.0.1 [S8530XPKH1] firmware Another Bada 2.0 firmware leaked for Samsung Wave 2 S8530 lately and this one which has a build number S8530XPKH1 CSC_S8530_Open_Europe_Common_OXA_KH1. A Europe firmware version for Samsung Wave 2 with build date August 2011. Many users recently has been using this firmware since it will add great improvements and enhancement for their phones. Although, this is only a leaked version it will still works and they love it. The procedure below will show you how they successfully upgrade their Samsung Wave to the BADA 2.0 firmware. All you need to have is to download the following files before proceeding: DISCLAIMER: I am not responsible for your phone if it gets bricked. Proceed at your risk! You have to flash it as a "full-firmware" and with bootfiles. Also, keep in mind that you have to set debug level to low and then you can fully use your bada 2.0 beta version. Even turning the phone off will not crash it. Just type *#33284*# and debug level to LOW, on BADA 2.0 flashed phone and enjoy the Difference. Troubleshooting hints if errors may happens while flashing. Only one thing important, when I flash, after the Bootfiles, i've got a serial port error. So I just unplug/plug my Wave to another USB port, and restart Multiloader (et restart the flash without the bootfiles, because they've already been flashed). - shutdown while in progress => reason is battery low level => charge it then try once more - phone can't go pass sim loading in booting progress => may be by CSC was not config, may be by flashing improper (ex. choosing wrong file wrong places) - Try to reboot without sim card inside the phone. If pass, keyin code *#5239870*# , select line 2 , keyin pass *#27236#* and select proper csc region for ur phone. - Some times phone can be login without sim (while with sim impos.bl) if wrong csc. ....................................... Switch off your phone and press Volume down key + Power key + Camera Key A download screen will appear on your phone Run Multiloader 5.65 only given with firmware Select LSI641 as below <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!> Tick Full Download<Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!> Click Boot and select Boot folder Click AMSS and select ‘amss.bin’ file which is located in the PC Click Apps and select ‘apps_compressed.bin’ file which is located in the PC Click Rsrc1 and select ‘Rsrc_ Open_Europe_Common.rc1’ Click Rsrc2 and select ‘Rsrc2_ (Low/Mid).rc2’ Click Factory FS and select ‘FactoryFs_ Open_Europe_Slav.ff Click CSC and select ‘S85X0XXXXX.csc’ Click SHP APP and select ‘ShpApp.app’.It should like this<Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!> Close Samsung Kies if opened Connect your phone to PC via USB cable Press Port Search and Download ....................................... Download:
