Chia sẻleagoo fomat read flash ok by nck

Action : Format UserData.
Selected 0-By CPU:MT6582
Exe version: NCKBox AndroidMTK 1.8.6.4
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM41)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6582_S01
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) TOSIBA 0x303034474530
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 11010030303447 : 000000000000000000
EMMC UA SIZE: 0xec000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xec480000 [3.692 GB]
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : DA USB VCOM Port (COM42)
Detecting format adress....wait!
FORMAT EMMC FLASH : BEGIN: 0x3de00000 - LEN: 0x7e00000
FORMAT EMMC FLASH : BEGIN: 0x45c00000 - LEN: 0x39c00000
Phone can start slow at first power on
If phone stuck on logo, perform wipe from recovery.
First start can take up to 5 min on some phones.
Wait untill phone will start charging.
All done.


Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM41)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6582_S01
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) TOSIBA 0x303034474530
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 11010030303447 : 000000000000000000
EMMC UA SIZE: 0xec000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xec480000 [3.692 GB]
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : DA USB VCOM Port (COM42)
Detected partitions count: 21
Start dumping flash, this can take up to 1 hour.......
Start procesing PRELOADER ......
Start procesing MBR ......
Reading: BEGIN: 0x880000 - LEN: 0x200
Start procesing EBR1 ......
Reading: BEGIN: 0x900000 - LEN: 0x200
Start procesing PRO_INFO ......
Reading: BEGIN: 0x980000 - LEN: 0x300000
Start procesing NVRAM ......
Reading: BEGIN: 0xc80000 - LEN: 0x500000
Start procesing PROTECT_F ......
Reading: BEGIN: 0x1180000 - LEN: 0xa00000
Start procesing PROTECT_S ......
Reading: BEGIN: 0x1b80000 - LEN: 0xa00000
Start procesing UBOOT ......
Start procesing BOOTIMG ......
Reading: BEGIN: 0x2600000 - LEN: 0x1000000
Start procesing RECOVERY ......
Reading: BEGIN: 0x3600000 - LEN: 0x1000000
Start procesing SEC_RO ......
Reading: BEGIN: 0x4600000 - LEN: 0x600000
Start procesing LOGO ......
Start procesing EBR2 ......
Reading: BEGIN: 0x4f80000 - LEN: 0x200
Start procesing ANDROID ......
Reading: BEGIN: 0x5a00000 - LEN: 0x38400000
Backup CACHE disabled, we will skip it....
Backup USRDATA disabled, we will skip it....
Backup FAT disabled, we will skip it....
Saved to : C:\Users\nhatgiat1007\Documents\Android_MTK\firmware_backup\0-By CPU_MT6582_12_26_2015_08_41_25
Wait untill phone will start charging.
All done.