Infinity Samsung software v1.04 Infinity Samsung software v1.04 - Service - FRP fixed and works well as per testers reports - Improvements and fixes as per users reports regarding previous versions To use this software you should activate it via IOS and update Smart-Card firmware ! To activate this software please read <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!> <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!> <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!> - <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>
Infinity-Box Chinese Miracle-2 RDA v1.06 released Infinity-Box Chinese Miracle-2 RDA v1.06 released LOD flashing support and other stuff RDA SP Platform - FlashEngine updated for RDA SP881x series RDA FP platform - LOD ( Factory Flash File format ) flashing supported! Tested with 8851/C and older CPU's, down to CT112x. - FlashID database updated and revised - CompileInfo extraction revised - UserCode reading revised Other - Repair security revised SP/FP - New FP Signed drivers uploaded to support ( x86 and x64 ) - Connection stack updated - Some bugfixes and improvements <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>
Infinity-Box Chinese Miracle II SCR (SPD/RDA ServiceTool) v1.00 - SC6533G support Infinity-Box Chinese Miracle II SCR (SPD/RDA ServiceTool) v1.00 - SPD SC6533G support New Module released - SpreadTrum/RDA Service Tool ( SCR ) Since RDA is outdated and sold (?) to SpreadTrum ( according code facts ) we decide to rebuild both SPD and RDA modules. From now SCR module will contain ONLY Modern RDA and Spreadtrum Feature phones. SPD will contain ONLY SmartPhones. That allow us bring our users new level of expirience and more new cool stuff. Stay tuned Supported CPU and features: Spreadtrum SC6533, SC6533G - Read Info ( Check Boot, HW verify ) > Complete read info - include ALL device HW details, display info etc. - Format FileSystem > Fast and complete safe way to reset and restore phone settings - Repair Security > Allow repair device security items. This feature is restricted and unavialable in some countries! - Read Firmware > Read complete phone fw, automatic verify code and whole fw structure > Read security settings, used to restore bricked/damaged phone functianlity > Read calibration items, used to restore network, audio and other phone settings - Write Firmware > Support Infinity firmware format ( combined ilod ) > Support Factory RAW firmware format ( single lod ) > Support partial flashing for Infinity and Factory firmware RDA Mirco: RDA8851 rev A,B,C,L,CL ( include latest revision 09 : CL ) RDA Micro: RDA8826 - Read Info ( Check Boot, HW verify ) > Complete read info, include ALL device HW details, display info etc. - Format FileSystem > Fast and complete safe way to reset and restore phone settings - Repair Security > Allow repair device security items. This feature is restricted and unavialable in some countries! - Read Firmware > Read complete phone fw, automatic verify code and whole fw structure > Read security settings, used to restore bricked/damaged phone functianlity > Read calibration items, used to restore network, audio and other phone settings - Write Firmware > Support Infinity FW format ( combined ilod ) > Support Factory RAW firmware format ( single lod ) > Support partial flashing for Infinity and Factory firmware Signed drivers are in support area <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>
Infinity `SM` software v1.06 released Infinity `SM` software v1.06 released Flash: - Fixed flasing bug if file for flash have over 4G size Service: - Add Read/Write Security for Qualcomm based phones - Add Reset FRP(and all user locks) via Download mode (Qualcomm and Exinos based phones only) Internal: - ADB procedures have been rewritten - Minor bugs have been fixed <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>
Infinity `SM` software v1.07 released Infinity `SM` software v1.07 released Flash: - fixed all flashing bugs Service: - add support for MTK based Samsung phones - improved FRP reset procedure via adb (reset FRP without userdata lost) Internal: - Minor bugs have been fixed <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>
Infinity-Box Android Service Tool / AST v1.03 - More FRP features Infinity-Box Android Service Tool / AST v1.03 - More FRP features ADB tab - Identify show more info - Set Device Mode More types of EDL reboot CMDs included Moto tab - Reset FRP operation for Moto devices revised Enable Factory Mode Enable ADB Disable Factory mode Supported ALL OLD and LATEST devices with SecurityPatch up to October 2017 - Flashing engine updated Fastboot tab - Asus ADB enable operation support more types (auto-detect) - Generic QLM and MTK FRP reset revised Other Some other changes and bugfixes Work under W10 x64/x86 optimized <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>
Infinity-Box Chinese Miracle SCR/SPD-RDA v1.01 - SC6531E support and more Infinity-Box Chinese Miracle SCR/SPD-RDA v1.01 - SC6531E support and more Spreadtrum SC6531E supported - WorldFirst - Flashing Factory PAC firmware - Flashing Binary Dump - Reading Binary Dump - Format FileSystem - Read User Code - Repair Security Items Customized Flashing supported ( flash only certain regions ) Spreadtrum SC6530 CPU supported Spreadtrum SC6531 CPU supported - Flashing Factory PAC firmware - Flashing Binary Dump: MCU, NVM, WHOLE - Reading Binary Dump - Format FileSystem - Read User Code - Repair Security Items Customized Flashing supported ( flash only certain regions ) Other features: Flashing PAC supported for SC6600 SC6530 SC6531 SC6531E SC7701 SC7702 SC6820 SC8810 SC6825 SC8825 Customized Flashing supported ( flash only certain regions ) <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>
Infinity `SM` software v1.08 released Infinity `SM` software v1.08 released UserData - addeded Read contacts from brocken phones How to use: Flash TWRP Recovery without checkbox `Reboot after flash` checked Reinsert battery Put phone in to Recovery mode: Volume up + Home + Power Connect usb cable Press Read button on UserDate page Contacts2.db file readed in Backup folder Work on phones with Android version lower than 6.0.1 <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>
Infinity-Box Chinese Miracle II SCR/SPD-RDA v1.02: New models and features Infinity-Box Chinese Miracle II SCR/SPD-RDA v1.02: New models and features Supported CPU list: Spreadtrum: SC6530, SC6531, SC6531(A/C), SC6531E, SC6533, SC6533G RDA Mirco: RDA8851 rev A,B,C,L,CL RDA Micro: RDA8826 Spreadtrum SC6533/G: Protocol updated Revised Repair security feature (fix 000.....00 problem correctly) - In case of problems - user MUST update FACTORY area! FW reading revised Identify now work faster Identify now show much info, as possible on most models Updated LOD tools ( flashing / customizing ) Spreadtrum SC6530/6531/A/C/E: Revised Repair security feature - Allow repair 3rd security field Format FileSystem feature updated User code read revised Internal loaders updated Spreadtrum other: Protocol updated PAC handling revised Improved Flashing procedure for SIGNED devices Customization for some 77xx line fixed <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!> <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!> <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>
Infinity `SM` software v1.10 released Infinity `SM` software v1.10 released Service - added Restore EFS via ADB (All model. Need Root) UserData - added read Calendar (Need TWRP) Installer has two parts: - InfinityBox_install_SM_v1.10 - InfinityBox_update_SM_ResourcePack_v1.09 (old one). If you have Resource Pack installed earlier you do not need to download and install it again ! <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>
Infinity `SM` software v1.11 released Infinity `SM` software v1.11 released Service - added Read CRT function for MTK based phones (need Root) Service - added Bacup SEC function for MTK based phones (need Root) Installer has two parts: - InfinityBox_install_SM_v1.11 - InfinityBox_update_SM_ResourcePack_v1.09 (old one). If you have Resource Pack installed earlier you do not need to download and install it again <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>
Chinese Miracle-2 MTK/Mediatek v2.00 - new CPU support, new features, new options Chinese Miracle-2 MTK/Mediatek v2.00 - new CPU support, new features, new options MTK 6570 CPU support: with NAND memory with eMMC memory Read Info - Complete device info, Security info Read Firmware - Factory Scatter format [ NAND supported - WorldFirst and unique! ] Write Firmware - Factory Scatter Format [ NAND supported - WorldFirst and unique! ] Read NVRAM Write NVRAM Repair Security Formay FS - FRP, Settings, Privacy ( and mixed/special mode ) MemoryTool MTK 6750 CPU support: Read Info - Complete device info, Security info Read Firmware Write Firmware Read NVRAM Write NVRAM Repair Security Formay FS - FRP, Settings, Privacy ( and mixed/special mode ) MemoryTool MTK 6755 CPU support: Read Info - Complete device info, Security info Read Firmware Write Firmware Read NVRAM Write NVRAM Repair Security Formay FS - FRP, Settings, Privacy ( and mixed/special mode ) MemoryTool MTK 6757 CPU support: Read Info - Complete device info, Security info Read Firmware Write Firmware Read NVRAM Write NVRAM Repair Security Formay FS - FRP, Settings, Privacy ( and mixed/special mode ) MemoryTool MTK 6763 CPU support: Read Info - Complete device info, Security info Read Firmware Write Firmware Read NVRAM Write NVRAM Repair Security Formay FS - FRP, Settings, Privacy ( and mixed/special mode ) MemoryTool MTK 6797 CPU support: Read Info - Complete device info, Security info Read Firmware Write Firmware Read NVRAM Write NVRAM Repair Security Formay FS - FRP, Settings, Privacy ( and mixed/special mode ) MemoryTool --- Under Test --- MTK 6758 CPU support: Read Info - Complete device info, Security info Read Firmware Write Firmware Read NVRAM Write NVRAM Repair Security Formay FS - FRP, Settings, Privacy ( and mixed/special mode ) MemoryTool MTK 6739 CPU support: with NAND memory with eMMC memory Read Info - Complete device info, Security info Read Firmware Write Firmware Read NVRAM Write NVRAM Repair Security Formay FS - FRP, Settings, Privacy ( and mixed/special mode ) MemoryTool Main - New look and design. All simplified and optimized much, as possible. [ please refer to v2 interface introduction ] - New core. All code made from scratch. - New boot chain selection mode - automatic ( via defined user combination ) or manual. - New connection - Complete error handling and explanation - Internal EMIDB cover 99% of existing memory devices on both - NAND and eMMC devices - Easy end user customization for adding support for new device etc. Flasher - Completely new flasher design, which allow customize whole flashing process [ please refer to v2 interface introduction ] FW Reader - Completely new core, which allow handle all existing types and flash devices. Service - Security repair NOT require reboot to meta, not required CDC drivers or whatever else. All direct. - Format FS include different mode, optimized for different secure devices type ( with FORMAT, WRITE protection ) - During NVRAM read/write SW also verify it condition and data MEMORY TOOL activated! Easy, fast and ultimate solution now come in MTK too! - Support eMMC and NAND flash IC secure - Allow READ, WRITE, ERASE partitions - Show partitions states and info only for eMMC devices - Allow RE-init PMT ( from scatter ) Other Lot of other changes from v1 line, which not mandatory to mention Known issues/warnings/info: 1. [NAND on MT6570] v1712, v1736 loader packages NOT SHOULD BE USED! Since they have ftl/ecc errors! In result you will give read/write FW errors and rest problems at all. Recommend use v1724 for FACTORY FW flashing, v18xx line for Infinity FW Flash Read and Write 2. [NAND on MT6570] In some cases "stuck on logo" devices can be fixed only via FFU (whole flash) format! 1. [NAND on MT6570] UBI SPARSE image flashing may take MUCH time (up to 5 minutes and more) for some devices! 3. [MEMORY TOOL] Partitions state on MEMORY TOOL will be empty in MT6570 NAND phones, it is normal and cannot be fixed. Read-write data, which you want, ignore "EMPTY" states. 4. [MEMORY TOOL] Old protocol secure devices (MT6750/MT6755) - LeEco and similar In some cases WIPE partition may not work! 5. ADL checksum MAY NOT WORK CORRECT on MT6570 NAND/eMMC devices! Result - stuck after system/userdata partition flashing 6. FileSyhstems flashing on some SBC-enabled devices ( except SYSTEM/CACHE/USER ) may fail! Solution - exclude them from flashing list. 7. Device with NV_TYPE2 security may not work yet for repair sec! <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>
Chinese Miracle-2 MTK/Mediatek v2.00 r2 - MT6739 support, SPUnlock and more Chinese Miracle-2 MTK/Mediatek v2.00 r2 - MT6739 support, SPUnlock and more As we told earlier, it was found some kind of problems with v2.00 at some PC and some hardware configuration. Current release should help to fix it. More details please see here - <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!> More details about current release: - Main MT6739 CPU supported! MT6739 moved from TEST to GENERAL support. Firmwware read Firmware write NVRAM read NVRAM write Reset Settings / Format FS Reset FRP Reset Privacy MemoryTool - MemoryTool Fixed PMT init on some devices Optimized Expand/Collapse view functions Fixed DA1804 and DA1712 loaders support for WIPE Optimized NAND support - Service NVRAM module updated .dynamic page detection .some types support fixed .repair security ( security type detection ) updated FormatFS / Reset settings rebuild .Activated fully automatic "FULL FACTORY" mode, designed for all modern devices ( include devices with SEC_CONTROL ) ."FULL FACTORY" mode set to default .Some "OLD" agents (DA15xx) may not work - SP Unlock activated Support all MTK modern phones, except MT6763 and MT6739. Read codes and Direct Unlock mode supported MT6570 eMMC ONLY devices supported - Core Fixed memory leak issues and problems with booting on some systems Optimized different OLD agents support for MODERN devices ( DA16xx and DA17xx line ) SW more faster now EMI handler for MT6570 and MT6797 fully automated and complete Improved EMI lookup support for MT675x devices EMIDB updated Hint/Error explain module updated MT6758 support under test MT6771 support under test - Flasher Fixed break issue, when just one file selected for flashing. HWInfo compatibility status shown in log in both cases ( succes or failed ) - FW reader MT6739 support New types of firmwares supported Optimized NAND reading on DA18xx line loaders Read Firmware size now shown in log - New models included Limited MEIZU support Limited Oppo support Limited Gionee support Limited BQ support Some basic "generic" secure devices support optimized Known issues/warnings/info : 1. [NAND on MT6570] v1712,v1736 loader packages NOT SHOULD BE USED! Since they have ftl/ecc errors! In result you will give read/write FW errors and rest problems at all. Recommend use v1724 for FACTORY FW flashing, v18xx line for Infinity FW Flash Read and Write 2. [NAND on MT6570] In some cases "stuck on logo" devices can be fixed only via FFU (whole flash) format! 3. [MEMORY TOOL] Partitions state on MEMORY TOOL will be empty in MT6570 NAND phones, it is normal and cannot be fixed. Read-Write data, which you want, ignore "EMPTY" states. 4. ADL checksum MAY NOT WORK CORRECT on MT6570 NAND devices! Result - stuck after system/userdata partition flashing 5. FileSystem flashing on some SBC-enabled devices ( except SYSTEM/CACHE/USER ) may fail! Solution - exclude them from flashing list. 6. Cheap MT6739 devices require BATTERY REMOVING after EVERY operation in most cases! 7. Meizu support is limited by Preloader Level ( No BROM SLA ) - you must UNTICK "PMT Update" and "PRELOADER" partition from flashing list! <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>
Infinity Chinese Miracle-2 MTK/Mediatek v2.00 r3 - More secured devices and features! Infinity Chinese Miracle-2 MTK/Mediatek v2.00 r3 - More secured devices and features ! - Main DownloadAgent version 1816 supported and tested on all supported SoC. Fixed some memory leaks Connection level revised - MemoryTool Fixed multi-selection GPT init revised Preloader init revised - Service Repair Security revised. Fixed issues with some Meizu and other models. - Core Optimized different agents versions support ( DA16xx line ) EMIDB updated Hint/Error explain module updated Activated SymLinks - allow reduce boot base size by redirecting diffirent brand/models if they have same base BootHelper ( stage 1 of 3 ) activated - hints/explanation of boot sequnce and correct file selection MT6758 support under test MT6771 support under test MT6765 support under test - Flasher Show Preloader HW compatibility when load firmware in flash tab Fixed file selection order - if SW package contain mixed types - secure will be selected by default - FW reader New types of firmwares supported Scatter creation optimized for some SoC - New models included Limited Alcatel support Limited Gionee support Limited Wiko support Limited Tecno support And diffirent other models Some other basic "generic" secure devices support optimized NAND devices on MT6570 moved to separate mode ( under base ) - FACTORY for ONLY FACTORY-provided FW flashing, INFINITY - for all rest operations Known issues/warnings/info : 1. [NAND on MT6570] v1712,v1736 loader packages NOT SHOULD BE USED! Since they have ftl/ecc errors! In result you will give read/write FW errors and rest problems at all. Recommend use v1724 for FACTORY FW flashing, v18xx line for Infinity FW Flash Read and Write 2. [NAND on MT6570] In some cases "stuck on logo" devices can be fixed only via FFU (whole flash) format! 3. [MEMORY TOOL] Partitions state on MEMORY TOOL will be empty in MT6570 NAND phones, it is normal and cannot be fixed. Read-Write data, which you want, ignore "EMPTY" states. 4. ADL checksum MAY NOT WORK CORRECT on MT6570 NAND devices! Result - stuck after system/userdata partition flashing 5. FileSystem flashing on some SBC-enabled devices ( except SYSTEM/CACHE/USER ) may fail! Solution - exclude them from flashing list. 6. Cheap MT6739 devices require BATTERY REMOVING after EVERY operation in most cases! 7. Meizu support is limited by Preloader Level ( No BROM SLA ) - you must UNTICK "PMT Update" and "PRELOADER" partition from flashing list! 8. [NAND on MT6570] In some cases device MAY DEAD after flashing! Make sure you have TESTED firmware version! If you have download FW from internet/other source - make sure it preloader CONTAIN 3 EMI record! Preloader jc45btlc with 2 records KILL SOME DEVICE TO UNRECOVERABLE STATE!!! Preloader info shown now during FW load. Credits : gracy_elec - different useful files contribution kamal_singla - testing and useful files contribution merujeffrey - useful files contribution and report logs Download link #1 - Download link #2 - <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>
Infinity Chinese Miracle-2 MTK/Mediatek v2.00 r4 - MT6771 support and other features Infinity Chinese Miracle-2 MTK/Mediatek v2.00 r4 - MT6771 support and other features ! - Main Connection level revised BROM level support optimized MT6771 CPU supported! MT6771 moved from TEST to GENERAL support. Firmwware read Firmware write NVRAM read NVRAM write Reset Settings / Format FS Reset FRP Reset Privacy MemoryTool - Service Repair Security revised. Fixed issues with some NV types. - Core EMIDB updated Hint/Error explain module updated MT6758 support under test MT6765 support under test - FW reader MT6771 supported New types of firmwares supported Scatter creation optimized - SP Unlock Revised unlock support for some models Info: MT6739/MT6763/MT6771 IS NOT supported YET! - New models included Limited Oppo support (F7/A3) Limited Vivo support And diffirent other models Some other basic "generic" secure devices support optimized Known issues/warnings/info: 1. [NAND on MT6570] v1712, v1736 loader packages SHOULD NOT BE USED due to these packages have ftl/ecc errors! In result you will give read/write FW errors and rest problems at all. Recommend use v1724 for FACTORY FW flashing, v18xx line for Infinity FW Flash Read and Write 2. [NAND on MT6570] In some cases "stuck on logo" devices can be fixed only via FFU (whole flash) format! 3. [MEMORY TOOL] Partitions state on MEMORY TOOL will be empty in MT6570 NAND phones, it is normal behaviour and can not be fixed. Read-Write data, which you want, ignore "EMPTY" states. 4. ADL checksum MAY NOT WORK CORRECT on MT6570 NAND devices! Result - stuck after system/userdata partition flashing 5. FileSystem flashing on some SBC-enabled devices ( except SYSTEM/CACHE/USER ) may fail! Solution - exclude them from flashing list. 6. Cheap MT6739 devices require BATTERY REMOVING after EVERY operation in most cases! 7. Meizu support is limited by Preloader Level ( No BROM SLA ) - you must UNTICK "PMT Update" and "PRELOADER" partition from flashing list! 8. [NAND on MT6570] In some cases device MAY DEAD after flashing! Make sure you have TESTED firmware version! If you have download FW from internet/other source - make sure it preloader CONTAIN 3 EMI record! Preloader jc45btlc with 2 records KILL SOME DEVICE TO UNRECOVERABLE STATE!!! Preloader info shown now during FW load. Credits : kamal_singla - testing and useful files contribution Important: - Software installed to new folder /CM2MT2/ and designed to support new models - Smart-Card firmware v0136 is Ok to use this version - DO NOT uninstall previous version 1.58 ! If you are trying to connect phone with new software and see a message like LEGACY MTK you should use version 1.58 for this device ! <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>
Infinity Chinese Miracle II SCR/SPD-RDA v1.03: New models and features Infinity Chinese Miracle II SCR/SPD-RDA v1.03: New models and features Supported CPU list: Spreadtrum: SC6530, SC6531, SC6531(A/C), SC6531E, SC6533, SC6533G RDA Mirco: RDA8851 rev A,B,C,L,CL RDA Micro: RDA8826 RDA Mirco RDA8851 rev A,B,C,L,CL/RDA8826 Flashing protocol updated Updated LOD tools ( flashing / customizing ) Spreadtrum SC6533/G: Protocol updated Support for REV2 bootrom mode activated FW reading revised Updated LOD tools ( flashing / customizing ) Spreadtrum SC6530/6531/A/C/E: Revised Repair security feature Flashing revised -> Activated "Format FFS" during BINARY dump writing -> Use that feature, if device not allow make direct format ( some C/E revision devices ) User code read revised - activated 2nd mode : from DUMP -> Press and hold LEFT SHIFT key, while starting ReadUsercode code operation. Select desired dump file to read code. Activated AUTO fixer for memory dumps Internal loaders updated Spreadtrum other: Protocol updated PAC handling revised Improved Flashing procedure for SC7701/SC7702 devices Improved Flashing procedure for SC6825/SC8825 devices Known issues[*]/warnings[!]/info: 1. AUTO fixer for memory dumps -> That feature will AUTOMATICALLY FIX dumps from devices with "abnormal" flash and memory layout ( issue found on number of devices 16MB flash with 8MB layout ) -> Just select binary dump in flashing tab or any other operation, which require file select. 2. [*] In some cases Format FFS may fail on E and C rev -> Read Flash Dump, write it back. During Dump writing SW will ask you about FormatFFS. <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>
Infinity `SM` software v2.01 released Infinity `SM` software v2.01 released - Service - add `Read Log` option for unlock Exynos phones via server - some bug fixed More information about software and activation process is here - <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!> Information about supported models and functions - <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!> Test reports - <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!> <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>
