Medusa PRO v.1.3.4 is out! <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!> Medusa PRO v.1.3.4 is out! Added Factory Repair (Boot) for Sony devices. Added support for Samsung SM-A500FU, Samsung SM-J700F, Huawei G630-U10, Sony D2303, Sony D5503, Sony D6603 via eMMC and support for OPPO A31 via USB. Added possibility to set extended options for boot operation mode. Uploaded new “Live logs” in to the Support Area. Medusa PRO v.1.3.4 Release Notes: - Sony Factory Repair feature has been released! You can try to repair boot on Sony devices via eMMC by using original Sony firmware («*.ftf» and "*.SIN_FILE_SET" versions of firmware are supported) This feature can be useful in case, if you don’t have the same working device to prepare Boot Repair file or device you want to repair currently is not supported. Note, device should have non-damaged native TA (Trim Area), otherwise device will not be repaired. We recommended to make backup of TA before repairing. Also, software will automatically try to detect and backup (read) TA partition from the phone to «Backup» folder before repairing. - Added support for the following models via eMMC: Samsung SM-A500FU - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Samsung SM-J700F - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Huawei G630-U10 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Sony D2303 - Read/Write/Erase, Easy Repair *, Partition Manager, Constructor for Repair Files Sony D5503 - Read/Write/Erase, Easy Repair *, Partition Manager, Constructor for Repair Files Sony D6603 - Read/Write/Erase, Easy Repair *, Partition Manager, Constructor for Repair Files - Added support for the following models via USB: OPPO A31 - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files - Added possibility to set extended options for boot operation mode. From now on you can set the following options: «Boot partition enable», «Boot ACK», «Boot bus width», «Reset boot bus conditions» and «Boot mode» - Box firmware has been updated to 1.16 version! In 1.16 firmware version we have improved eMMC connection and eMMC Read operations To update firmware automatically, it is necessary to connect the Box and only then run the software. Also, you can update Box firmware manually via «Update Box Firmware» button at the «Welcome» tab in Medusa Pro software - Medusa card firmware has been updated to 2.5 version! To run Medusa Pro Software v.1.3.4 and future versions, it is necessary to update card firmware. Also note, that after updating card firmware to v.2.5, it won’t be possible to run older Software versions - Uploaded Full flash for Huawei G620S-L01 into the Support Area - Uploaded new “Live logs” into the Support Area - Added more detailed operations’ logging - Improved work (parsing) with pit files - All pinouts and repair procedures are described in the manual ("Help" button in the software) * Note: device should have non-damaged native TA; otherwise device will not be repaired Medusa - Ultimate Breakthrough in the Phone Repair! <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>
Medusa PRO v.1.3.5 is out - Asus devices repair added! <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!> Medusa PRO v.1.3.5 is out! Added support for Asus Nexus 7 (ME571K), Asus ZenFone 5 (T00F), Asus ZenFone 5 (T00P KL), Asus Memo Pad 7 (K01A), Asus FonePad (K012), Nokia XL Dual Sim (RM-1030), Nokia Lumia 635 (RM-975), Samsung Galaxy Win Pro SM-G3812, Samsung Galaxy E5 SM-E500H via eMMC and support for LG US991 and Asus ZenFone 2 (Z00LD) via USB. Released support for "Qualcomm MSM8939" core (general QC USB loader added). Read/Write/Full Erase operations are supported. Uploaded new “Live logs” in to the Support Area. Medusa PRO v.1.3.5 Release Notes: - Added support for the following models via eMMC: Asus Nexus 7 (ME571K) - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Asus ZenFone 5 (T00F) - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Asus ZenFone 5 (T00P KL) - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Asus Memo Pad 7 (K01A) - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Asus FonePad (K012) - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Nokia XL Dual Sim (RM-1030) - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Nokia Lumia 635 (RM-975) - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Samsung SM-G3812 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. khurram136) Samsung SM-E500H - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files - Added support for the following models via USB: LG US991 - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files Asus ZenFone 2 (Z00LD) - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files - Released support for "Qualcomm MSM8939" core (general QC USB loader added). Read/Write/Full Erase operations are supported - Uploaded new “Live logs” in to the Support Area - Made improvements in Help and Pinout viewer - All pinouts and repair procedures are described in the manual ("Help" button in the software) Medusa - Ultimate Breakthrough in the Phone Repair! <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>
Medusa PRO v.1.3.6 is out! <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!> Medusa PRO v.1.3.6 is out! Added support via eMMC (ISP) for HTC Desire Eye M910n, HTC One DS (PN07710), HTC Desire 626 (OPM9120), HTC Desire 510 (OPCV200), Samsung SM-J500FN, Samsung GT-I9505, LG LS665 and HUAWEI Ascend Mate 7 (MT7-L09). Uploaded new “Live logs” in to the Support Area. Medusa PRO v.1.3.6 Release Notes: - Added support for the following models via eMMC: HTC Desire Eye (M910n) - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files HTC One DS (PN07710) - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files HTC Desire 626 (OPM9120) - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files HTC Desire 510 (OPCV200) - Read/Write/Erase, Easy Repair*, Partition Manager, Constructor for Repair Files Samsung SM-J500FN - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Samsung GT-I9505 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files LG LS665 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files HUAWEI Ascend Mate 7 (MT7-L09) - Read/Write/Erase, Easy Repair*, Partition Manager, Constructor for Repair Files - Improved create GP partitions procedure - Added last selected folder setting save in Open Firmware dialog window - Uploaded new “Live logs” in to the Support Area - All pinouts and repair procedures are described in the manual ("Help" button in the software) Medusa - Ultimate Breakthrough in the Phone Repair! <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>
Medusa PRO v.1.3.8 is out! <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!> Medusa PRO v.1.3.8 is out! Added support via eMMC (ISP) for HTC One A9u, HTC One M7 (PN07110), Samsung SM-J120H, Samsung GT-I9500, LG H818P and LG D410hn. Added Qualcomm USB loaders for MSM7x30, MSM8926, MSM8930, MSM8x25, MSM8x25A, MSM8x25Q. Uploaded new “Live logs” in to the Support Area. Some fixes and improvements. Medusa PRO v.1.3.8 Release Notes: - Added support for the following models via eMMC: HTC One A9u - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files HTC One M7 (PN07110) - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Samsung SM-J120H - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Samsung GT-I9500 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files LG H818P - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files LG D410hn - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files - Added Qualcomm USB loaders for MSM7x30, MSM8926, MSM8930, MSM8x25, MSM8x25A, MSM8x25Q. Read/Write operations are supported (thanks to Mr. rebainoor) - Added reading of Android build info from the device, while connecting it via eMMC - Fixed issue with writing CID operation in some cases - Improved procedure of changing default firmware folder - Updated help and pinouts in Smart Repair File (SRF) for Samsung GT-I9001 (please re-download SRF) (thanks to Mr. Dr_Wolodya) - Box firmware has been updated to 1.18 version! In 1.18 firmware version we have improved eMMC connection and write CID operation. To update firmware automatically, it is necessary to connect the Box and only then run the software. Also, you can update Box firmware manually via «Update Box Firmware» button at the «Welcome» tab in Medusa Pro software. - Uploaded new “Live logs” in to the Support Area - All pinouts and repair procedures are described in the manual ("Help" button in the software) Medusa - Ultimate Breakthrough in the Phone Repair! <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>
Medusa PRO v.1.3.9 is out! <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!> Medusa PRO v.1.3.9 is out! Added support via eMMC (ISP) for Samsung SM-G316HU, Samsung SM-J320F, LG AS330, LG M400DY and support via USB for LG H961N, LG AS330 and LG M160! Added «eMMC Write/Update firmware» for the numerous of Samsung eMMC chips. Box firmware has been updated. Uploaded new “Live logs” in to the Support Area. Some fixes and improvements. Medusa PRO v.1.3.9 Release Notes: - Added support for the following models via eMMC: Samsung SM-G316HU - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Samsung SM-J320F - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files LG AS330 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files LG M400DY - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files - Added support for the following models via USB: LG H961N - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files LG AS330 - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files LG M160 - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files - Uploaded SRF for LG K430 into the Support Area («USER UPLOADED SRF» folder) (thanks to Mr. agrsat) - Added «eMMC Write/Update firmware» for the following Samsung eMMC chips: KLM4G1FE3B-B001 (M4G1FB) KMS5U000KM-B308 (SSU00M) KMSJS000KM-B308 (SJS00M) KMVUS000LA-B304 (VUS00A) KLM8G2FE3B-B001 (M8G2FB) KMJJS000WA-B409 (JJS00A) KMKUS000VM-B410 (KUS00M) KMNJS000ZM-B205 (KJS00M) KMK7U000VM-B309 (K7U00M) KMN5X000ZM-B209 (N5XZMB) KLM8G1WEMB-B031 (8WMB3R) KMK7X000VM-B314 (K7XVMB) KMK5X000VM-B314 (K5XVMB) We have tested and added Test Point (TP) pictures to force eMMC into Boot Mode for each of mentioned above eMMC chips. To write/update eMMC firmware, please complete the following steps: Select «eMMC» interface option Select «Brand: eMMC_chips» Select eMMC chip part number in «Model:» software list Press «Help» button to view eMMC pinout and TP picture. Acknowledge the manual. Solder all necessary wires to connect eMMC (if necessary, solder TP wire to force eMMC into Boot Mode, Product name will be displayed as 000000) Press «Connect» button to connect eMMC (if necessary, connect TP to GND) When connection is successful, release (disconnect) TP wire from GND and go to «eMMC service» tab in the software Press «Write/Update firmware» button, select proper eMMC chip from the list and press "Write/Update eMMC firmware" button NOTE: PLEASE DON’T SELECT INCORRECT eMMC (WITH NON-MATCHING PART NUMBER)! WRITING INCORRECT FIRMWARE WILL DAMAGE YOUR EMMC! - Added auto-analyzing of TA (Trim Area) zone in Sony devices (structure, IMEI, lock status). From now on software automatically checks TA zone and inform you, whether TA is correct or it is damaged. You should remember, for successful repair of most Sony devices, their TA should be original and non-damaged. - Box firmware has been updated to 1.19 version! In 1.19 firmware version we have improved eMMC detection procedure. To update firmware automatically, it is necessary to connect the Box and only then run the software. Also, you can update Box firmware manually via «Update Box Firmware» button at the «Welcome» tab in Medusa Pro software. - Uploaded new “Live logs” in to the Support Area - Some changes in log information - All pinouts and repair procedures are described in the manual ("Help" button in the software) Medusa - Ultimate Breakthrough in the Phone Repair! <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>
Medusa PRO v.1.4.0 is out! Massive update! Many models and new features added! <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!> Medusa PRO v.1.4.0 is out! Massive update! Many models and new features added! Added support via eMMC for LG D856, LG K120K, LG K220DS, LG K330, LG K410, LG K430DS, LG L24, LG M200N, LG TP450, LG VS880PP, LG US215, LG US550, Samsung SM-J320AZ, Samsung SM-G900T, Samsung SM-T210, Nokia Lumia 820, Asus FonePad ME175CG, Asus Zenfone Max Z010D, Huawei RIO-L03 and support via USB for LG D295, LG D856, LG F570S, LG F620, LG K210, LG L24, LG M153! Released write firmware via eMMC feature for devices, CPUs based on Qualcomm (Qualcomm raw images with “rawprogram0.xml”). Released support for Qualcomm MSM8929 and MSM8x12 cores (general QC USB loaders added); Read/Write/Full Erase operations are supported. Also added new loaders for MSM8x10, MSM8x26, MSM8909, MSM8916, MSM8936. Box firmware has been updated. Uploaded new “Live logs” into the Support Area. Some adjustments and improvements were made. Medusa PRO v.1.4.0 Release Notes: - Added support for the following models via eMMC: LG D856 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files LG K120K - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files LG K220DS - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files LG K330 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files LG K410 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files LG K430DS - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files LG L24 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files LG M200N - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files LG TP450 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files LG VS880PP - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files LG US215 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files LG US550 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Samsung SM-J320AZ - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Samsung SM-G900T - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Asus FonePad ME175CG - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Asus Zenfone Max Z010D - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Huawei RIO-L03 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files - Added support for the following models via USB: LG D295 - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files. LG D856 - Write, Easy Repair, Partition Manager, Constructor for Repair Files. For repairing it is necessary to disable write data verification. LG F570S - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files. LG F620 - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files. LG K210 - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files. LG L24 - Write, Easy Repair, Partition Manager, Constructor for Repair Files. For repairing it is necessary to disable write data verification. LG M153 - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files. - Uploaded SRF for Samsung SM-T210 into the Support Area ("USER UPLOADED SRF" folder) (thanks to Mr. agrsat). - Uploaded SRF for Nokia Lumia 820 into the Support Area (“USER UPLOADED SRF” folder) (thanks to Mr. mathew_di) - Updated help and pinouts in Smart Repair File (SRF) for Sony D6603 (please re-download SRF) (thanks to Mr. nstm0) - Released writing firmware via eMMC for devices, based on Qualcomm CPUs (Qualcomm raw images with “rawprogram0.xml”). - Released support for Qualcomm MSM8929 and MSM8x12 cores (general Qualcomm USB loaders added); Read/Write/Full Erase operations are supported. - Added Qualcomm USB loaders for MSM8x10, MSM8x26, MSM8909, MSM8916, MSM8936; Read/Write operations are supported. - Improved auto-analyzing of TA (Trim Area) zone in Sony/SE devices (thanks to Mr. Radiotrance) - Box firmware has been updated to 1.20 version! In this firmware version we have improved “Write/Update eMMC firmware” procedure (fixed Write CID error for some eMMC). To update firmware automatically it is necessary to connect the Box and only then run the software. Also, you can update Box firmware manually via “Update Box Firmware” button at the “Welcome” tab in Medusa Pro software. - Uploaded new “Live logs” into the Support Area - Some changes were made in log information - All pinouts and repair procedures are described in the manual ("Help" button in the software) Medusa - Ultimate Breakthrough in the Phone Repair! <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>
Medusa PRO v.1.4.2 is out! New models and USB loaders were added! <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!> Medusa PRO v.1.4.2 is out! New models and USB loaders were added! Added support via eMMC for Asus Zenfone 6 (T00G), Huawei ALE-L21, Samsung SM-G386F, Samsung SM-J106F, Samsung SM-J120F, Samsung SM-J321AZ, Samsung GT-I9190, Samsung GT-I9192 and support via USB for Alcatel OneTouch POP 3 5065D, Alcatel OneTouch Idol 3 6039Y, Alcatel OneTouch Idol 3 6045I, Asus ZenFone Selfie (Z00UDB), Vivo Y51L, ZTE Z9 (NX508J)! Added general Qualcomm USB loaders for MSM8909, MSM8917, MSM8926, MSM8928, MSM8936, MSM8916, MSM8976, MSM8994, MSM8996. Uploaded new “Live logs” into the Support Area. Some adjustments and improvements were made. Medusa PRO v.1.4.2 Release Notes: - Added support for the following models via eMMC: Asus Zenfone 6 (T00G) - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Huawei ALE-L21 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Samsung SM-G386F - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Samsung SM-J106F - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Samsung SM-J120F - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Samsung SM-J321AZ - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Samsung GT-I9190 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Samsung GT-I9192 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files - Added support for the following models via USB: Alcatel OneTouch POP 3 5065D - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files Alcatel OneTouch Idol 3 6039Y - Write, Easy Repair, Partition Manager, Constructor for Repair Files Alcatel OneTouch Idol 3 6045I - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files Asus ZenFone Selfie (Z00UDB) - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files Vivo Y51L - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files ZTE Z9 (NX508J) - Write, Easy Repair, Partition Manager, Constructor for Repair Files - Added 15+ general Qualcomm USB loaders for MSM8909, MSM8917, MSM8926, MSM8928, MSM8936, MSM8916, MSM8976, MSM8994, MSM8996. Read/Write/Full Erase operations are supported - Improved communication in ADB connection Mode - Uploaded SRF for HTC D820U (OPFJ100) into the Support Area ("USER UPLOADED SRF" folder) (thanks to Mr. rohit.sharma73) - Uploaded new “Live logs” in to the Support Area - Some changes were made in log information - All pinouts and repair procedures are described in the manual ("Help" button in the software) Medusa - Ultimate Breakthrough in the Phone Repair! <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>
Medusa PRO v.1.4.3 - added Motorola Factory Repair and more! <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!> Medusa PRO v.1.4.3 is out! Added Factory Repair (Boot) for Motorola devices, based on Qualcomm CPUs. Added support for Motorola XT1021, Motorola XT1030, Motorola XT1032, Motorola XT1034, Motorola XT1541, Motorola XT1064, Motorola XT1097 and Microsoft Lumia 535 (RM-1090) via eMMC. Added new general Qualcomm USB loaders for MSM8909, MSM8936, MSM8974, MSM8994, MSM8996. Uploaded new “Live logs” into the Support Area. Medusa PRO v.1.4.3 Release Notes: - Motorola Factory Repair feature has been released. You can try to repair boot on Motorola devices, based on Qualcomm CPUs, via eMMC by using original Motorola firmwares (firmwares with “*.xml”). This feature can be useful if you don’t have the same working device to prepare Boot Repair file or device you want to repair currently is not supported. Note, device should have non-damaged CID partition, otherwise it could cause problems with writing firmware after repairing. We recommended making backup of CID partition before repairing. Also, software will automatically try to detect and backup (read) CID partition from the phone to “Backup” folder after connecting. - Added support for the following models via eMMC: Motorola XT1021 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Motorola XT1030 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Motorola XT1032 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Motorola XT1034 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Motorola XT1541 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Motorola XT1064 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Motorola XT1097 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Microsoft Lumia 535 (RM-1090) - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files - Box firmware has been updated to 1.21 version! In this firmware version we have improved eMMC Read/Write operations. To update firmware automatically, it is necessary to connect the Box and only then run the software. Also, you can update Box firmware manually via “Update Box Firmware” button at the “Welcome” tab in Medusa Pro software. - Released Pause/Resume operations in Download Manager (“Download *.srf” button in Software). - Uploaded new “Live logs” in to the Support Area - All pinouts and repair procedures are described in the manual ("Help" button in the software) Medusa - Ultimate Breakthrough in the Phone Repair! <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>
Medusa PRO v.1.4.5 - many new phones added! <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!> Medusa PRO v.1.4.5 is out! New models added! Added support for LG LS450, LG LS675, LG V520, Samsung SM-J100VPP, Samsung SM-J120A, Samsung SM-J3110, Samsung SM-G386W, Samsung SM-P605, Samsung GT-N7105, HTC One SV C520e (PL80130) and Prestigio PSP 3504 DUO via eMMC. Uploaded new “Live logs” into the Support Area. Medusa PRO v.1.4.5 Release Notes: - Added support for the following models via eMMC: LG LS450 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files LG LS675 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files LG V520 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Samsung SM-G386W - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Samsung SM-J100VPP - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Samsung SM-J120A - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Samsung SM-J3110 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Samsung GT-N7105 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Samsung SM-P605 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files HTC One SV C520e (PL80130) - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Prestigio PSP 3504 DUO - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. help-mi) - Uploaded new “Live logs” into the Support Area - Improved operation logging - Uploaded new eMMC (ISP) pinout picture for another PCB revision of SM-j320F into the Support Area (thanks to Mr. rebainoor) - All pinouts and repair procedures are described in the manual ("Help" button in the software) Medusa - Ultimate Breakthrough in the Phone Repair! <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>
Medusa PRO v.1.4.6 - Massive update! <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!> Medusa PRO v.1.4.6 is out! New models, USB loaders and features added! Added support for Samsung SM-J111M, Samsung SM-J320M, Samsung SM-G361H, Samsung SM-G531H/DS, Samsung GT-I9295, Samsung SM-N900J, Samsung SM-T567V, HTC Desire 616, Sony E6553 via eMMC and support for LG H440N and Huawei Y625-U32 via USB! Added General Qualcomm USB loaders for MSM8x26, MSM8929, MSM8940, MSM8953, MSM8992. Added more than 35 unique Qualcomm USB loaders for different vendors' devices. Added possibility to select external Qualcomm USB loader! Improvements in Content Extractor - added possibility of manual scanning (parsing) data from file or from connected via eMMC device. Uploaded new “Live logs” into the Support Area. Medusa PRO v.1.4.6 Release Notes: - Added support for the following models via eMMC: Samsung SM-J111M - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Samsung SM-J320M - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. JSOUZA)* Samsung SM-G361H - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Samsung SM-G531H/DS - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. HELP-MI)* Samsung GT-I9295 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Samsung SM-N900J - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Samsung SM-T567V - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files HTC Desire 616 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Sony E6553 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. TREJO1998)* - Added support for the following models via USB: LG H440N - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. CYKADA)* Huawei Y625-U32 - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. REBAINOOR)* * SFR files created by users are uploaded into “USER UPLOADED SRF” folder of the Support Area. - Added General Qualcomm USB loaders for MSM8x26, MSM8929, MSM8940, MSM8953, MSM8992. Read/Write/Full Erase operations are supported. - Added more than 35 unique Qualcomm USB Loaders for different vendors' devices (Read/Write/Full erase operations are supported): Xiaomi - added loaders for MSM8916, MSM8917, MSM8936, MSM8937, MSM8953, MSM8976, MSM8992, MSM8996 Vivo - added loaders for MSM8917, MSM8937, MSM8953, MSM8976, MSM8996 Nokia - added loaders for MSM8937 and MSM8998 Oppo - added loader for MSM8937 ZTE - added loader for MSM8996 - Added possibility to select external Qualcomm USB loader! From now on you can select external Qualcomm USB loader ("*.mbn», "*.bin", "*.elf") to connect the device via USB. This feature will be useful, if built-in USB loaders are not compatible with your device, or necessary loader is not included in the Software. To select external USB loader, do the following: select "USB" option in Software, select "Brand: Custom Settings", select "Device (Core): Custom Loader" and press “Connect” button to select loader and connect the device. Don't forget to put the device into "Qualcomm...9008" mode before. - Improvements in "Content Extractor": Added possibility of manual scanning (parsing) data from file or from connected via eMMC device. From now on you can select method that will be used for parsing folders and data – “Full Scan” or “Manual Scan”. “Full Scan” will parse all folders and data and may take 0-1-2 hours. If you don’t need to scan (parse) all data and wait long time, you can use "Manual Scan" method, which allows you to select a folder to parse and scanning process takes only few seconds. Just press "Read from file…” or “Read from device” button and select method for data scanning (parsing). - Uploaded new “Live logs” into the Support Area - All pinouts and repair procedures are described in the manual ("Help" button in the software) Medusa - Ultimate Breakthrough in the Phone Repair! <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>
Medusa PRO v.1.4.8 is out! <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!> Medusa PRO v.1.4.8 is out! New models added! Added support for Samsung SM-J320A, Samsung SM-G750A, Samsung SCH-I605, Samsung SGH-I317, Samsung SHV-E270S via eMMC and support for Alcatel OT-4060A, Alcatel OT-5054O and Alcatel OT-6055U via USB. Many improvements and new possibilities. Uploaded new “Live logs” into the Support Area. Medusa PRO v.1.4.8 Release Notes: - Added support for the following models via eMMC: Samsung SM-J320A - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Samsung SM-G750A - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Samsung SCH-I605 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Samsung SGH-I317 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Samsung SHV-E270S - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files - Added support for the following models via USB: Alcatel OT-4060A - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files Alcatel OT-5054O - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files Alcatel OT-6055U - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files - Added possibility to select any SRF manually after device connecting (from now on “Smart repair” button is always active after successful device connecting). - Added new USB loaders for Qualcomm MSM8952 CPU for Alcatel devices. - Improvements on “Boot operation mode” tab: During “Boot operation mode” installation next to “Partition config” and “Boot bus config” register drop-down lists you may now see the final value of these registers (in Hex and Bin formats). Added operation with H/W reset function [RST_N_FUNCTION] register. - Improvements when outputting information to Software log: Added showing of sizes (capacities) of partitions when connecting eMMC. Added possibility of showing the partition table (start address, length) in Hex values. To do this, it is necessary to select option “Partition info in Hex address” at “Welcome” tab of Software. Added possibility of clearing Software log by pressing right mouse button. - Improved “Factory Repair” operation and searching of “Build info” for Samsung devices, based on TI OMAP 4430 CPU (thanks to andrei_d1978). - Improvements in Download Manager - added possibility to select and download group of files (select files by vendor) from the Support Area. - Uploaded new SFR for Huawei Y530-U00 into the Support Area. - Uploaded new “Live logs” into the Support Area. - All pinouts and repair procedures are described in the manual ("Help" button in the software). Medusa - Ultimate Breakthrough in the Phone Repair! <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>
Medusa PRO v.1.5.0 is out! New models and USB loaders added! Added support for Alcatel 5025D, Lenovo S860, Samsung SM-J110H, ZTE A510 via eMMC and support for Artel GM 4G, Asus Z010DA, Asus ZE550KL, LG M700, Vivo Y55A via USB. New Qualcomm USB loaders added. Uploaded new “Live logs” in to the Support Area. Some adjustments and improvements were made. Medusa PRO v.1.5.0 Release Notes: - Added support for the following models via eMMC: Alcatel 5025D - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. help-mi)* Lenovo S860 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. help-mi)* Samsung SM-J110H - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files ZTE A510 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. help-mi)* - Added support for the following models via USB: Artel GM 4G - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. QobilbekRishtan)* Asus Z010DA - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files Asus ZE550KL - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files LG M700 - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files Vivo Y55A - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files - Added 15+ new Qualcomm USB loaders for the following devices (Read/Write/Full erase operations are supported): Asus - for MSM8916, MSM8929, MSM8937, MSM8939 LG - for MSM8937 Moto - for MSM8996 ZTE - for MSM8996 ZUK - for MSM8996 Xiaomi - for MSM8998, SDM660 * SFR files created by users are uploaded into "USER UPLOADED SRF" folder of the Support Area - Added new generic (common) Qualcomm USB loaders for MSM8917 and SDM660 - Improved procedures of sending USB loaders - Some adjustments and improvements were made - Uploaded new “Live logs” into the Support Area. - All pinouts and repair procedures are described in the manual ("Help" button in the software). Medusa - Ultimate Breakthrough in the Phone Repair! <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>
Merry Christmas and Happy New Year! Medusa team wishes you and your family a wonderful holiday season! Medusa PRO v.1.5.1 is out! New models and features added! Added support for Samsung SM-J210F, Samsung SM-G386T, Samsung SM-G530T, LG M700TV, ASUS MeMO Pad FHD 10 (ME302KL), HTC One M9 (0PJA200), Motorola XT1723, ZTE Z667 via eMMC and support for Xiaomi Redmi Note 4X and Xiaomi Redmi 5A via USB. Uploaded new “Live logs” in to the Support Area. Some adjustments and improvements were made. Medusa PRO v.1.5.1 Release Notes: - Added support for the following models via eMMC: Samsung SM-J210F - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Samsung SM-G386T - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Samsung SM-G530T - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files LG M700TV - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. Burini) HTC One M9 (0PJA200) - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files ASUS MeMO Pad FHD 10 (ME302KL) - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. ZELEKXXX) Motorola XT1723 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files ZTE Z667 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files - Added support for the following models via USB: Xiaomi Redmi Note 4X - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files Xiaomi Redmi 5A - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. ZELEKXXX) - Added possibility of work with devices via “USB” interface without Medusa/Medusa Pro/Octoplus Box connected to PC (card should be connected). - Some changes added to Partition Manager (added possibility to open and write “*.mpt” files). - Improved procedure of USB loaders operation. - Some adjustments and improvements were made - Uploaded new “Live logs” into the Support Area. - All pinouts and repair procedures are described in the manual ("Help" button in the software). Medusa - Ultimate Breakthrough in the Phone Repair! <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>
Medusa PRO v.1.5.2 is out! New models and USB loaders added! Added support for LG LS775, LG H700, Samsung GT-I9200, Sony F3311 via eMMC and support for Asus Z00UDB, LG K371, Xiaomi Redmi Note 5a, Xiaomi Redmi Note 5a Prime, Xiaomi Mi5X (A1), Xiaomi Redmi 5A and ZTE Axon A1 via USB. Added general (common) Qualcomm USB loaders for MSM8917 and MSM8940. Added more than 20 unique Qualcomm USB loaders for different vendors' devices. Uploaded new “Live logs” in to the Support Area. Some adjustments and improvements were made. Medusa PRO v.1.5.2 Release Notes: - Added support for the following models via eMMC: LG LS775 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files LG H700 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Samsung GT-I9200 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Sony F3311 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files - Added support for the following models via USB: Asus Z00UDB - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files LG K371 - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files Xiaomi Redmi Note 5a - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files Xiaomi Redmi Note 5a Prime - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files Xiaomi Mi5X (A1) - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files Xiaomi Redmi 5A - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files ZTE Axon A1 - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files - Added more than 20 unique Qualcomm USB Loaders for different vendors' devices (Read/Write/Full erase operations are supported): Alcatel - added loaders for MSM8909, MSM8916, MSM8929 Asus - added loader for MSM8916 Coolpad - added loaders for MSM8929 and MSM8936 Lenovo - added loaders for MSM8x26 QCT - added loader for MSM8x10 WING - added loader for MSM8x10 ZTE - added loader for MSM8974 - Added general (common) Qualcomm USB loaders for MSM8917 and MSM8940. - Improved procedure of USB loaders operation. - Some adjustments and improvements were made - Uploaded new “Live logs” into the Support Area. - All pinouts and repair procedures are described in the manual ("Help" button in the software). Medusa - Ultimate Breakthrough in the Phone Repair! <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>
Medusa PRO v.1.5.4 is out! New eMMC firmwares, new models and USB loaders added! Added “eMMC Write/Update firmware” for the range of new Samsung eMMC chips. Added support for Haier W716, LG D722V, Motorola XT1550, Motorola XT1562, Samsung SM-G532M, Sony F3111 via eMMC and support for Alcatel 5054N, Alcatel 6055D, Huawei Nexus 6, Vivo Y66 and ZTE Z983 via USB. Added general (common) Qualcomm USB loaders for MSM8916 and MSM8936. Added more than 20 unique Qualcomm USB loaders for different vendors' devices. Uploaded new “Live logs” in to the Support Area. Some adjustments and improvements were made. Medusa PRO v.1.5.4 Release Notes: - Added “eMMC Write/Update firmware” for the following Samsung eMMC chips: KLMAG2GE2A-A001 (MAG2GA) KLM8G1WEMB-B011 (8WMB1R) KLMAG4FE4B-B002 (MAG4FB) KMJ5U000WA-B409 (J5U00A) KMJ5U000WM-B409 (J5U00M) KMK2U000VM-B604 (K2U00M) KMK5W000VM-B312 (K5WVMB) KMK5X000YM-B314 (K5XYMB) KML5U000HM-B505 (L5U00M) KMSJS000KA-B308 (SJS00A) KMS5X000KM-B313 (S5XKMB) KMV3U000LM-B304 (V3U00M) KMVUS000LM-B304 (VUS00M) KMVWU000LM-B900 (VWU00M) KMN9W000RM-B205 (N9WRMB) To write/update firmware in mentioned above eMMC chips, do the following: Select "eMMC" interface option Select "Brand: eMMC_chips" Select eMMC chip part number in "Model:" software list Press "Help" button to view eMMC pinout and TP picture. Acknowledge the manual. Solder all necessary wires to connect eMMC (if necessary, solder TP wire to force eMMC into Boot Mode, Product name will be displayed as 000000) Press "Connect" button to connect eMMC (if necessary, connect TP to GND) When connection is successful, release (disconnect) TP wire from GND and go to "eMMC service" tab in the software Press "Write/Update firmware" button, select proper eMMC chip from the list and press "Write/Update eMMC firmware" button NOTE: PLEASE DON’T SELECT INCORRECT eMMC (WITH NON MATCHING PART NUMBER)! WRITING INCORRECT FIRMWARE WILL DAMAGE YOUR EMMC! - Box firmware has been updated! In 1.23 firmware version we have improved “eMMC Write/Update firmware” procedure. To update Box firmware automatically, it is necessary to connect the Box and only then run the software. Also, you can update Box firmware manually via “Update Box Firmware” button at “Welcome” tab in Medusa Pro Software. - Added support for the following models via eMMC: Haier W716 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. gunit1) LG D722V - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Motorola XT1550 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Motorola XT1562 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Samsung SM-G532M - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Sony F3111 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files - Added support for the following models via USB: Alcatel 5054N - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files Alcatel 6055D - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files Huawei Nexus 6 - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files Vivo Y66 - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files ZZTE Z983 - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files - Added 20 unique Qualcomm USB Loaders for different vendors' devices (Read/Write/Full erase operations are supported): Alcatel - added loader for MSM8976 Asus - added loaders for MSM8937 Coolpad - added loader for MSM8976 Cyan - added loaders for MSM8936 and MSM8994 Huawei - added loader for MSM8994 Lenovo - added loaders for MSM8909 and MSM8976 Micromax (MMX) - added loader for MSM8909 Oppo - added loader for MSM8976 Wik - added loader for MSM8909 Wing - added loader for MSM8937 ZTE - added loaders for MSM8909 and MSM8940 - Added general (common) Qualcomm USB loaders for MSM8916 and MSM8936. - Improved “Factory Repair” operation for MediaTek CPUs-based LG devices. - Some adjustments and improvements were made - Uploaded new “Live logs” into the Support Area. - All pinouts and repair procedures are described in the manual ("Help" button in the software). Medusa - Ultimate Breakthrough in the Phone Repair! <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>
Medusa PRO v.1.5.5 is out! Added USB UFS support, support for Galaxy S8/S8+/Note 8 and more! Added support for work with UFS flash chips via USB using USB Qualcomm UFS loaders! Added support for Samsung SM-G930T, Samsung SM-G935V, Samsung SM-G950U, Samsung SM-G955U, Samsung SM-N950U, LG H870, Xiaomi Mi5S, Lenovo K53a48 via USB and support for LG H901, Motorola XT1642, Motorola XT1676, Samsung GT-I9301i, Sony F3112 via eMMC. Added 15+ unique Qualcomm USB loaders (for work with eMMC and UFS flash) for devices of different vendors. Uploaded new “Live logs” in to the Support Area. Some adjustments and improvements were made. Medusa PRO v.1.5.5 Release Notes: - Added support for the following models via eMMC: LG H901 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Motorola XT1642 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Motorola XT1676 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Samsung GT-I9301i - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Sony F3112 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files - Added support for the following models via USB: Lenovo K53a48 - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files LG H870 - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files Samsung SM-G930T - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files Samsung SM-G935V - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files Samsung SM-G950U - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files Samsung SM-G955U - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files Samsung SM-N950U - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files Xiaomi Mi5S - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files - Added support for work with UFS flash chips via USB using USB Qualcomm UFS loaders: Added USB Qualcomm UFS loaders to Software for the following vendors’ devices: - LG - for MSM8996. - Samsung - for MSM8996 and MSM8998. - Xiaomi - for MSM8953 and MSM8996 Added possibility to select external USB Qualcomm UFS loader! From now on you can select external USB Qualcomm UFS loader ("*.mbn", "*.bin", "*.elf") to connect the device with UFS chip via USB. This feature will be useful, if built-in USB Qualcomm UFS loaders are not compatible with your device, or necessary loader is not included in the Software. To select external USB Qualcomm UFS loader, do the following: select "USB" option in Software, select "Brand: Custom Settings", select "Device (Core): Custom Loader UFS” and press “Connect” button to select loader and connect the device. Don't forget to put the device into "Qualcomm...9008" mode before. Read/Write/Full erase operations for each physical partition are supported with USB Qualcomm UFS loaders! Note: When connecting the devices by using USB Qualcomm UFS loaders, “Factory Repair” operation is currently not supported and will be added in future Software updates. - Added 20 unique Qualcomm USB Loaders for different vendors' devices (Read/Write/Full erase operations are supported): Asus - added loader for MSM8953 Moto - added loaders for MSM8953 Oppo - added loaders for MSM8953 Vivo - added loaders for MSM8953 Wik - added loaders for MSM8953 Yu - added loader for MSM8953 - Added general (common) Qualcomm USB loader for MSM8953. - Improved eMMC erase operation for some Samsung eMMC flash chips (thanks to Mr. andrei_d1978). - Fixed TP picture in Software for KMKJS000VM-B309 eMMC flash chip (thanks to Mr. Jenuk). - Uploaded new “Live logs” into the Support Area - Some adjustments and improvements were made - All pinouts and repair procedures are described in the manual ("Help" button in the software). Medusa - Ultimate Breakthrough in the Phone Repair! <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>
Medusa PRO v.1.5.6 is out! Added LG Factory Repair for USB UFS connection and more! Added LG Factory Repair support for devices connected via USB Qualcomm UFS loaders! Added support for Alcatel 5098O, Lenovo K10e70, Oppo A53, Stream System_B1, Stream_B3, VFD 511, Wiko Ridge Fab 4G via USB and support for Alcatel 5098O, LG K550, LG P769, Motorola XT1563, Samsung SM-G900F, Sony G3112 via eMMC. Added new unique USB Qualcomm Loaders (UFS and eMMC) for different vendors' devices. Added new general (common) Qualcomm USB loaders (eMMC) for MSM8976 and MSM8992. Uploaded new “Live logs” in to the Support Area. Some adjustments and improvements were made. Medusa PRO v.1.5.6 Release Notes: - Added support for the following models via eMMC: Alcatel 5098O - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files LG K550 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files LG P769 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Motorola XT1563 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Samsung SM-G900F - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Sony G3112 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files - Added support for the following models via USB: Alcatel 5098O - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files Lenovo K10e70 - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files Oppo A53 - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files Stream System_B1 - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. Rebainoor) Stream_B3 - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. MDxavi) VFD 511 - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files Wiko Ridge Fab 4G - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. MDxavi) - Added LG Factory Repair support for devices connected via USB Qualcomm UFS loaders! “*.tot”, “*.dz” and “*.kdz” firmwares are supported. - Added 3 new USB Qualcomm Loaders (UFS) for MSM8996 and MSM8998 for Samsung devices. - Added 10 unique Qualcomm USB Loaders (eMMC) for different vendors' devices (Read/Write/Full erase operations are supported): LG - added loaders for MSM8992 Lenovo - added loader for MSM8974 ZTE - added loaders for MSM8940 and MSM8976 VFD - added loader for MSM8909 - Added new general (common) Qualcomm USB loaders (eMMC) for MSM8976 and MSM8992. - Updated help and pinouts in SRF for Samsung GT-N8000, please re-download SRF file (thanks to Mr. kosmonaft). - Uploaded new “Live logs” into the Support Area - Some adjustments and improvements were made - All pinouts and repair procedures are described in the manual ("Help" button in the software). Medusa - Ultimate Breakthrough in the Phone Repair! <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>
Medusa PRO v.1.5.7 is out! Released Qualcomm Factory Repair for USB UFS connection using XML firmwares and more! Added Factory Repair support for devices connected via USB Qualcomm UFS loaders using XML firmware! Added support for Alcatel 7048X, Huawei S7-721u, Oppo CPH 1701, Oppo R7g, Oppo R9s Plus, ZTE N9560, ZTE Z982 via USB and support for LG LM-X210MA, LG MS210, LG VS990, Oppo A37fw, Oppo R7g, Sony C6602, Sony G3221, ZTE N956 and ZTE Z982 via eMMC. Added new unique USB Qualcomm Loaders (UFS and eMMC) for different vendors' devices. Added new unique general (common) Qualcomm USB loaders (USF and eMMC). Uploaded new “Live logs” in to the Support Area. Some adjustments and improvements were made. Medusa PRO v.1.5.7 Release Notes: - Added support for the following models via eMMC: LG LM-X210MA - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files LG MS210 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files LG VS990 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Oppo A37fw - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Oppo R7g - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Sony C6602 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Sony G3221 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files ZTE N9560 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files ZTE Z982 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files - Added support for the following models via USB: Alcatel 7048X - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. Rebainoor) Huawei S7-721u - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. Rebainoor) Oppo CPH 1701 - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files Oppo R7g - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files Oppo R9s Plus - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files ZTE N9560 - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files ZTE Z982 - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files - Added Qualcomm Factory Repair support for devices connected via USB Qualcomm UFS loaders using XML firmwares! - Added new unique Qualcomm USB Loaders (UFS) for the next vendors' devices (Read/Write/Full Erase operations are supported): Moto - added loaders for MSM8996 ZTE - added loaders for MSM8996 ZUK - added loader for MSM8996 - Added new unique Qualcomm USB Loaders (eMMC) for the next vendors' devices (Read/Write/Full Erase operations are supported): Asus - added loaders for MSM8916 and MSM8937 Infinix - added loader for MSM8937 Oppo - added loader for MSM8940 - Added 4 new general (common) Qualcomm USB loaders (UFS) for MSM8996. - Added new general (common) Qualcomm USB loaders (eMMC) for MSM8909 and MSM8916. - Uploaded new “Live logs” into the Support Area - Some adjustments and improvements were made - All pinouts and repair procedures are described in the manual ("Help" button in the software). Medusa - Ultimate Breakthrough in the Phone Repair! <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>
Medusa PRO v.1.5.8 is out! Added support for new type of Motorola firmwares (xml) for Factory Repair and more! Added support for new type of Motorola firmwares (xml) for Factory (Boot) Repair of Motorola devices, based on Qualcomm CPUs. Added support for LG H812, Stream System IRON, Oppo A37fw via USB and support for Coolpad Catalyst 3622A5, Micromax Q415, Oppo CPH 1701, Samsung SM-G361F, Samsung SM-G350E, Samsung GT-I9060M and ZTE Z836BL via eMMC. Added new unique USB Qualcomm Loaders (eMMC) for different vendors' devices. Added new unique general (common) Qualcomm USB loaders (UFS and eMMC). Uploaded new “Live logs” in to the Support Area. Some adjustments and improvements were made. Medusa PRO v.1.5.8 Release Notes: - Added support for the following models via eMMC: Coolpad Catalyst 3622A5 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. gunit1) Micromax Q415 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Oppo CPH 1701 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Samsung SM-G361F - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Samsung SM-G350E - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Samsung GT-I9060M - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files ZTE Z836BL - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files - Added support for the following models via USB: LG H812 - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. Starkrimes) Stream System IRON - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. Rebainoor) Oppo A37fw - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files - Added support for new type of Motorola firmwares (xml) for Factory (Boot) Repair of Motorola devices, based on Qualcomm CPUs. Don’t forget, that device should have non-damaged CID partition, otherwise it could cause problems with writing firmware after repairing. We recommend making backup of CID partition before repairing. Also, software will automatically try to detect and backup (read) CID partition from the phone to "Backup" folder after connecting. - Added new unique Qualcomm USB Loaders (eMMC) for the following vendors' devices (Read/Write/Full erase operations are supported): Asus - added loaders for MSM8916 and SDM660 MMX - added loader for MSM8937 Vivo - added loaders for MSM8953 and SDM660 Wiko - added loader for MSM8937 Xiaomi - added loader for MSM8937 - Added new general (common) MSM8998 Qualcomm USB loader (UFS) for LG devices. - Added new general (common) Qualcomm USB loaders (eMMC) for MSM8916, MSM8917, MSM8937 and SDM636. - Uploaded new “Live logs” into the Support Area - Some adjustments and improvements were made - All pinouts and repair procedures are described in the manual ("Help" button in the software). Medusa - Ultimate Breakthrough in the Phone Repair! <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>
Medusa PRO v.1.5.9 is out! New models and new loaders were added! Added support for LG D850, LG D851, LG LS990, LG LS998, LG US998, Micromax Q4251 via USB and support for Asus Z00AD, Huawei T1-701U, Lenovo S2110, LG H324T, Meizu M1, Micromax E313, Micromax Q372, Sony D2533, Sony E5333, Sony E5603 and Wiko Lenny via eMMC. Added new unique USB Qualcomm Loaders (eMMC) for different vendors' devices. Uploaded new “Live logs” in to the Support Area. Some adjustments and improvements were made. Medusa PRO v.1.5.9 Release Notes: - Added support for the following models via eMMC: Asus Z00AD - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Huawei T1-701U - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Lenovo S2110 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files LG H324T - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. Starkrimes) Meizu M1 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. Starkrimes) Micromax E313 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Micromax Q372 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Sony D2533 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. Starkrimes) Sony E5333 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. Starkrimes) Sony E5603 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Wiko Lenny - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. Starkrimes) - Added support for the following models via USB: LG D850 - Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. Starkrimes) LG D851 - Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files LG LS990 - Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files LG LS998 - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. Starkrimes) LG US998 - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files Micromax Q4251 - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files - Added new unique Qualcomm USB Loaders (eMMC) for the next vendors' devices (Read/Write/Full erase operations are supported): Asus - added loader for MSM8937 Coolpad - added loader for MSM8976 Gionee - added loader for MSM8940 Hisense - added loader for MSM8937 Lenovo - added loader for MSM8953 Vivo - added loaders for MSM8917 and MSM8953 Xiaomi - added loaders for MSM8917 and MSM8953 ZTE - added loader for MSM8953 - Added new general (common) Qualcomm USB loaders (eMMC) for MSM8929 and MSM8937. - Uploaded eMMC pinout picture for Samsung SM-J727P into the Support Area (thanks to Mr. Quetzaltloani). - Uploaded new “Live logs” into the Support Area - Improved partitions’ search operation. - Some adjustments and improvements were made - All pinouts and repair procedures are described in the manual ("Help" button in the software). Medusa - Ultimate Breakthrough in the Phone Repair! <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>
