↑ ↓
  1. noname
    Offline

    noname V.I.P

    Tham gia ngày:
    20/5/11
    Bài viết:
    7,056
    Đã được thích:
    1,807
    <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

     
    27 August 2011

    What is new:

    ***************************** Ver5.601 (2011-8-18) ****************************
    New features:
    1£º [MTK] MT6236 supported
    2£º [MTK] netword unlock improved
    3£º [MStar] MSW8533C Nand supported
    4£º [All Chips] Support new flash memory:
    NOR_K5N6433ATB
    NOR_MX29GL640E_H_L
    NOR_MX29NS640E
    NOR_S29VS064R_T
    NOR_M58WR032KU
    NAND_HY27UF084G2B
    5£º[MISC] Flasher Log Added
    6£º[MISC] Flasher info can copy to the clipboard directly with the right click

    <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

     

    <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

     
    <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

     

    <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

     
    <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

     

    <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

     
    <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

     


    << New Revolution Fast pinout Detection tool For all Chinese Phones >>

    Best Regards,
    <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

     ​

     
  2. noname
    Offline

    noname V.I.P

    Tham gia ngày:
    20/5/11
    Bài viết:
    7,056
    Đã được thích:
    1,807
    [​IMG]

    Avator Team

    Pinout Installer Ver 3.0.1 released

    New pinout
    New Images
    Better quality
    Collected from the entire network


    <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

     

     
  3. noname
    Offline

    noname V.I.P

    Tham gia ngày:
    20/5/11
    Bài viết:
    7,056
    Đã được thích:
    1,807
    New 3 Huawei Datards Supported by Avator Team

    3 Huawei Datards Supported by Avator Team

    Huawei UMG181
    Huawei UMG1691
    Huawei K4505


    How UNlock this news Models

    calculate the Imei ..

    Entered a simcard contrary to the modem "No original simcard"
    Install the Modem
    Open the modem suite "! Mobile partner!
    This we ask for a code to let us enter the NCK code entered calculated
    Ready
    operation successfull


     
  4. noname
    Offline

    noname V.I.P

    Tham gia ngày:
    20/5/11
    Bài viết:
    7,056
    Đã được thích:
    1,807
    Download From :<Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

     

    Please Post Results Like I Do

    [​IMG]

    [​IMG]

    [​IMG]

    Download Flash File :<Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

     

    p.s : all other off topic thanks etc post will be remove


    Thanks so much for support Avatorbox Team , more update on the way Enjoy !

     
  5. noname
    Offline

    noname V.I.P

    Tham gia ngày:
    20/5/11
    Bài viết:
    7,056
    Đã được thích:
    1,807
    Hi Avatorbox User.,


    Recently many Members Reported After Download rar file Cannot not Extract , Support Site not working Many times .


    We found the issue .

    Server HDD Changed And Restored all Files and Setups
    Server OS upgraded
    Server DNS Corrected


    Clear your Cache, temp in your web Browser's



    Post here if still facing any problem



    I Recommeded To use Google Public DNS To Download Fast and Acess


    DNS settings are specified in the TCP/IP Properties window for the selected network connection.
    Example: Changing DNS server settings on Microsoft Windows 7
    1. Go the Control Panel.
    2. Click Network and Internet, then Network and Sharing Center, and click Change adapter settings.
    3. Select the connection for which you want to configure Google Public DNS. For example:
      • To change the settings for an Ethernet connection, right-click Local Area Connection, and click Properties.
      • To change the settings for a wireless connection, right-click Wireless Network Connection, and click Properties.
      If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
    4. Select the Networking tab. Under This connection uses the following items, select Internet Protocol Version 4 (TCP/IPv4) or Internet Protocol Version 6 (TCP/IPv6) and then click Properties.
    5. Click Advanced and select the DNS tab. If there are any DNS server IP ad dress listed there, write them down for future reference, and remove them from this window.
    6. Click OK.
    7. Select Use the following DNS server ad dress. If there are any IP ad dress listed in the Preferred DNS server or Alternate DNS server, write them down for future reference.
    8. Replace those ad dress with the IP ad dress of the Google DNS servers:
      • For IPv4: 8.8.8.8 and/or 8.8.4.4.
      • For IPv6: 2001:4860:4860::8888 and/or 2001:4860:4860::8844
    9. Restart the connection you selected in step 3.
    10. Test that your setup is working correctly; see <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

        below.

    11. Repeat the procedure for additional network connections you want to change.


    Regards
    Avatorbox

     
  6. noname
    Offline

    noname V.I.P

    Tham gia ngày:
    20/5/11
    Bài viết:
    7,056
    Đã được thích:
    1,807
    How To Use Pin-Finder Cables With Avator Box Check Inside


    Hi Friends ,

    This Method Will Big Help To AvatorBox Users Really Its Great Discovery From Avator Box Team Hope You All Will Enjoy And Liked It [​IMG] We Are the 1st To Release This Solution For Our Precious Avator Users...


    In This I Will Guide You How To Use Wired Cables With Our Avatorbox.

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    Regards
    Avatorbox Team
     
  7. noname
    Offline

    noname V.I.P

    Tham gia ngày:
    20/5/11
    Bài viết:
    7,056
    Đã được thích:
    1,807
    [​IMG]


     
  8. noname
    Offline

    noname V.I.P

    Tham gia ngày:
    20/5/11
    Bài viết:
    7,056
    Đã được thích:
    1,807
    [​IMG]
     
  9. noname
    Offline

    noname V.I.P

    Tham gia ngày:
    20/5/11
    Bài viết:
    7,056
    Đã được thích:
    1,807
    [​IMG]
     
  10. noname
    Offline

    noname V.I.P

    Tham gia ngày:
    20/5/11
    Bài viết:
    7,056
    Đã được thích:
    1,807
    Happy New Year 2012 to all AvatorBox user.

    [​IMG]

    This is High Performance Control Panel for AvatorBox User Only

    For news
    For faster in working

    This console is required to register at AvatorBox official site.
    Plz registering before using.

    Download it. <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

     

    For opening AvatorBox Urgent Console. Require SWF Player or you can use this software.

    Download : <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

     

    After install K-Lite Codec Pack.
    Run Windows Media Classic [Come with K-Lite Codec Pack]
    Go to > View > Options > Player > Formats
    @ Association > Click on All Then Apply and OK

    Enjoy.

     
  11. noname
    Offline

    noname V.I.P

    Tham gia ngày:
    20/5/11
    Bài viết:
    7,056
    Đã được thích:
    1,807
    May be not perfect in your eyes But useful in your works

    By this cable converter you can use USB cable come with phone as flash cable

    Tested with MicroUSB 100 % worked [Working as 05B]

    [​IMG]

    [​IMG]

     
  12. noname
    Offline

    noname V.I.P

    Tham gia ngày:
    20/5/11
    Bài viết:
    7,056
    Đã được thích:
    1,807
    HWK CHip error 45 FIXED by AVATOR BOX

    Here is the pin out guide na sinundan namin..

    [​IMG]

    - Pinahinang ko sa kanya.

    [​IMG]
    [​IMG]

    - Then after that sinaksak ko na sya sa avator.

    - SET PINOUTS. From Avator SW, click PINOUT.
    [​IMG]

    *At eto step by step procedure sa hwk repair ver 2.0.0


    - run *quot;Avator!! HWK Repair.exe*quot;

    - Click on setting and do select setting as shown
    *quot;Avator!! HWK Repair ver 2.0.0 CONFIG*quot; then press ok
    [​IMG]

    - Select MSP430F11X1

    - Click on erase

    - Then open the file *quot;AVATOR_REPAIR_HWK_3.08 HWL Flash File.bin*quot; and click on prog



    SEE SCREENSHOTS:
    [​IMG]

    [​IMG]

    [​IMG]

    - After that assemble.. Put HWK cip on the HWK Box. Connect usb and install drivers.


    - Tried to run DCTxBB5 but error is like this:
    [​IMG]

    - So i decied to UPDATE
    [​IMG]

    SUCCESS UPDATE:
    [​IMG]


    - Tried to run the DCTxBB5 again if success, but it goes like this:

    [​IMG]

    I use other PC and intall the Support suite and the main suite

    - Finally, i tried to run DCTxBB5, and here it goes, SUCCESS!!!
    [​IMG]
     
  13. noname
    Offline

    noname V.I.P

    Tham gia ngày:
    20/5/11
    Bài viết:
    7,056
    Đã được thích:
    1,807
    [​IMG]

    [​IMG]


    Initializing...
    DA_LIB_VER_3.9.0.0
    Tip: The phone must be able to power-on normally
    It is sensing the pinout fast,please hold on the phone Power key
    RXD=3 TXD=2
    Connecting...Please hold on the POWER key until the red gauge is going...
    Any errors please select another boot and try again.
    BB:6236, HardwareVer:8A02, SoftwareVer:8A00
    Read info.[​IMG], Waitting enter meta...
    Connected...can release Power button now, tracking...
    checking network/sp/sim lock status...
    Unlock done.
     
  14. noname
    Offline

    noname V.I.P

    Tham gia ngày:
    20/5/11
    Bài viết:
    7,056
    Đã được thích:
    1,807
    Here LOG of working

    Chip=MTK
    Action=ReadInfo
    FlashType=Nand
    boot=Ver3.1108
    Expert Mode=Disable
    Range[start]=0x0
    Range[size]=0x08400000
    FlashFile=D:\I-Mobile ศูนย์\SW VERSION\381\IMS381_NUMX_TH-T01[2096D_2_9].bin.bin
    Comport=COM29
    Baudrate=921600

    CPU_Type=MT6235
    CPU_ID=00000003
    NOR_ID=0000000000000000
    NOR_Size=0MB
    NOR_Name=Nor:N/A
    NOR_DieCnt=
    NAND_ID=002000F10000001D
    NAND_Size=128MB
    NAND_Name=[ST] ST01GR4B

    Initializing...
    DA_LIB_VER_3.9.0.0
    It is sensing the pinout fast,please hold on the phone Power key
    RXD=18 TXD=16
    Connecting...Please hold on the POWER key until the red gauge is going...
    Any errors please select another boot and try again.
    BB:6235, HardwareVer:8A01, SoftwareVer:8A04
    Loading boot...
    INT_SYSRAM_BOOT test completed.
    Loading boot...
    Boot2 test completed.
    Nor Flash ID: 0000000000000000
    Nand Flash ID: 002000F10000001D
    Read Hardware Information is done.
    Get Project ID from phone...
    Project ID: IMS381_NUMX_TH-T01[2096D_2_9]

    After flashed need Format with Auto function.

    Chip=MTK
    Action=Format
    FlashType=Nand
    boot=Ver3.1108
    Expert Mode=Disable
    Range[start]=0x0
    Range[size]=0x08400000
    FlashFile=D:\I-Mobile ศูนย์\SW VERSION\381\IMS381_NUMX_TH-T01[2096D_2_9].bin.bin
    Comport=COM29
    Baudrate=921600


    Initializing...
    DA_LIB_VER_3.9.0.0
    It is sensing the pinout fast,please hold on the phone Power key
    RXD=18 TXD=16
    Connecting...Please hold on the POWER key until the red gauge is going...
    Any errors please select another boot and try again.
    BB:6235, HardwareVer:8A01, SoftwareVer:8A04
    Loading boot...
    INT_SYSRAM_BOOT test completed.
    Loading boot...
    Boot2 test completed.
    Nor Flash ID: 0000000000000000
    Nand Flash ID: 002000F10000001D
    Read Hardware Information is done.
    Get Project ID from phone...
    Project ID: IMS381_NUMX_TH-T01[2096D_2_9]
    Changing baudrate to 921600...
    Done.
    Formatting Flash...
    AutoFormat address: start=0x02400000, size=0x05C00000
    -------------Info-------------
    Total Blocks=0x000002E0
    Bad Blocks =0x00000001
    Error Blocks=0x00000000
    -------------------------------
    All Done

    This phone have Bad Block in NAND But all working well.

    Flashing

    [​IMG]

    Formating

    [​IMG]


    Br
    AvatorBox Team
     
  15. noname
    Offline

    noname V.I.P

    Tham gia ngày:
    20/5/11
    Bài viết:
    7,056
    Đã được thích:
    1,807
    1. Open the locks after the network software to choose the correct serial port, the default is COM1.

    2. To ensure that phone and computer connections, while the key * # boot after the three keys to enter the test mode phones (that is, test poweron!). In test mode, to ensure the successful completion of unlock.

    3. Unlock the software click the "Unlock" button, "Unlock" into a "Running", said the software is working, wait until the interface a "PASS" icon, that unlock success. After unlocking the original IMEI, remain unchanged.

    Download
    <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

     
    <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

     

    Support for the following operating systems:

    Windows 2000
    Windows XP 32/64-bit
    Windows Vista 32/64-bit
    Windows Server 2003 32/64-bit
    Windows 7 32/64-bit
    Windows 8 32/64-bit
    Windows Server 2008

     
  16. noname
    Offline

    noname V.I.P

    Tham gia ngày:
    20/5/11
    Bài viết:
    7,056
    Đã được thích:
    1,807
    AVATOR BOX (China Phones Service Tool) VER 5.814
    29 February 2012


    What is new:

    **************** Ver5.814 (2012-02-29)******************

    1.Support Tab Button implemented (Feature update Only Registered user can use.)

    2. (SPD) SC6610/20 format improved
    3. (SPD) SC6610/20 unlock improved
    4. (MTK) 6252 Communication improved
    5. (MSTAR) 8533C Improved

    Bug Fixes:

    1. (SPD) some SC6610/20 ReadFlash bugs fixed
    FLASH MEMORIES SUPPORTED

    1. (SPD) Support GIGABUTE/FIDELIX/WINBOND/EON/SST
    2. (All Chips) Support new serial flash memory:
    SF_PCT26WF064
    SF_FM25M32A
    SF_MX25L12833EZ

    IMPROVMENT
    1. Serial flash family WriteFlash on SC6610/20


    Support Site : <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

     

    Reagrds/GsmUniversal
    Avatorbox Team

     
  17. noname
    Offline

    noname V.I.P

    Tham gia ngày:
    20/5/11
    Bài viết:
    7,056
    Đã được thích:
    1,807
    AG-TEL MODEL CHETAK SUCESSFULLY DONE
    [​IMG]



    AG-TEL MODEL CHETAK FLASH FILE HERE

    <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

     

     
  18. noname
    Offline

    noname V.I.P

    Tham gia ngày:
    20/5/11
    Bài viết:
    7,056
    Đã được thích:
    1,807
    T SERIES PLAY -model-210 WRITE FLASH OK

    [​IMG]


    FLASH FILE HERE

    <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

     


     
  19. noname
    Offline

    noname V.I.P

    Tham gia ngày:
    20/5/11
    Bài viết:
    7,056
    Đã được thích:
    1,807
    Tintele model - T1 WRITE FLASH OK

    [​IMG]


    [​IMG]

    FLASH FILE HERE

    <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

     

     
  20. noname
    Offline

    noname V.I.P

    Tham gia ngày:
    20/5/11
    Bài viết:
    7,056
    Đã được thích:
    1,807
    How UNlock This New MEP:29973-004

    Easy

    You Open Blackberry Factory Tool v.3.0.0

    Write the IMEI: xxxxxxxxxxxx013
    Select MEP:06041-011

    press calculate!!


    We have generated your NCK CODE (MEP2) to unlock your BB


    .EXE or more will be updated tomorrow then just wait .. and expect others to copy

    Thanks to Karurosu & j3soft


    This MEP is not supported by any other tool
    [​IMG]
     

Chia sẻ trang này

Google+