Setool New Update v1.1204 Released... v1.1204 Mã: - fixed "dead phone after unlock" for some latest j20 phones. - x10 with android firmware 2.3.3 supported for altbypass unlock - msm8x60 sony phones supported ( lt26,lt28,is12s,so-03d ). Standard operations supported - flash,trim area read/write. Network unlock only supported using s1 signature server, which is offline for us. - added support for one interesting activation. <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>
Update setool Đối với Box đã active rồi anh em cũng cần update lại tốn 20 credits. Dùng tool update mới nhất 0.95. *Link download:<Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!> *Setool 1.1204 new:<Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!> <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!> Mã: setool2 SmartCard updater [0.95] server read: "srv01.dontexist.com" username read: "updater" Please click on reader with setool2 SmartCard. Ready to work SmartCard update started... CARD SERIAL: 00149209 Checking with server... setool2 card not activated, credits will be used...... Uploading.............................................................................. Update completed Anh em đọc lại thông tin phía dưới: after smartcard update, setool2 no more require internet connection or any credits to service any qualcomm-based semc phone, which supported for altbypass method. that means, you can unlock,repair, rebuild hwconfig for free, without any internet connection. all settings and procedures are same as usual, but internet connection no more required, if card is updated. semc qualcomm-based phones, which supported by altbypass, are: Mã: WT18,LT15a,LT15at,LT15i,E15a,E15i,MT15a,MT15i,WT18i,Z1i, IS07,IS11S,ST18a,ST18i,MK16a,MK16i,ST17a,ST17i,SK17a,SK17i,X10a,X10i ST15a,ST15i,MT11a,MT11i,SO-01B,SO-02C,SO-01C,U20a,U20i, E10a,E10i,E16a,E16i,WT19a,WT19i,LT18a,LT18i,R800a,R800at,R800i,R800x update is paid, cost 20 setool2 credits. it is DOES NOT matter, if card was already activated or updated to work with >1.107 version. LGTool will be activated and uploaded automatically during process.
v1.1280 Mã: - fixed m1_aspen flashing - fixed flashing of ICS firmwares for 8x55 phones - removed java-based altbypass method for all a1 phones,except pnx5230-based phones. - reset-based unlock method is now standard altbypass unlock method for a1 phones. you can not use usb as interface for altbypass unlock on db2000,db2010-based phones anymore. you do not need restoration files,bypass files ( still need them for pnx5230-based phone ). and ... altbypass unlock is much quicker and quite "one-buttoned" now ;) - added x1 unlock via codes, all you need - enter IMEI on locks tab and press "request". Cost is 1 credit. due to major core rewrite, some bugs can appear in a1 phone service patterns, despite i checked all supported phones in different modes. if you will find problems, feel free to report them on forum. <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>
Setool v1.1285 added quite complex, but working procedure to unlock last SEMC A2 phone, j108 cedar from network locks. beginners, stay away from this procedure. other users, welcome to faq for details. <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!> - STE U8500 sony phones supported ( lt22,mt26,st25 ). Standard operations supported - flash,trim area read/write. Network unlock only supported using s1 signature server, which is offline for us. STE U8500 support was done blindly, should work, but need to be tested. <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>
SE Tool v1.1287 - fixed unlock problems with some sharp 3g phones. - added secunits backup during j108 bypass procedure - misc cosmetic changes <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>
v1.1288 Mã: - fixed recovery procedure for totally erased x10 phones - fixed ESN recovery for corresponding phones <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>
Setools Download Link V1.1428 14/06/2017 - added support for boot recovery of MT6582,MT6732,MT6735,MT6752,MT6755,MT6795-based phones this is all <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!> MTK-based models, except G-series instructions : install latest usbflash drivers ( ggsetup-3.1.0.11.exe ) select proper phone model, add to FW area required firmware, check signed mode + altbypass, press "flash" if phone has damaged boot, just connect phone and press "ready", setool2 will do all other job if phone has damaged security units or "stucked" boot ( no device appears, when phone connected to PC ) - you need to open phone, connect testpoint to GND, connect USB cable to PC, release testpoint and then press "ready" - added support for boot recovery of MSM8994-based phones this is E58xx, E65xx, E66xx models <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>